are you trying to connect to the server in ssh with root login?? did you enabled root login in sshd config? About the audio out, what output did he used? LEFT? RIGHT? usb fob or uri-x or rim ? you can check in usbradio.conf to see wich one as voice or composite. this could help.. Le sam. 27 juil. 2019 à 10:27, Len Griffin <lengriff@optimum.net> a écrit :
I am trying to help a friend with a first-time Allstar setup by creating a step-by-step guide. I’m following the ‘ Beginners Guide ‘ from the Wiki.
All went well until the radio-tune-menu. Step 1 OK. Step 2 OK, plenty of noise level and squelch set. Step 3 – set rx voice level – there is no level at all, no matter what number I use.
Secondary issue..I cannot connect with SSH ( WinSCP ). _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.