I had some weird noises coming from a node I installed on VMplayer on my windows 7 machine aswell. In speaking with a few VM gurus they believed it was the time slicing VMplayer does that was causing it, and I was trying to use a URI. Now, your mileage may very, but I have a HUB node and a URIx connected to my Proxmox <http://www.proxmox.com/proxmox-ve> server and both work flawless. I did not do any custom modification to the install, but I did have to map the USB device to my Allstar VM through Proxmox. Monty On Wed, Aug 7, 2013 at 7:07 AM, Tim Sawyer <tim.sawyer@me.com> wrote:
Have you ever updated the source? https://allstarlink.org/support.html#astupgrade If not give it a try. -- Tim :wq
On Aug 6, 2013, at 11:11 PM, David and Rhianne Osborn < david.osborn@manx.net> wrote:
I omitted to clarify that this test was VMWare player and, to be honest, it does appear to sound and work OK, but I’ll heed the advice that it may misbehave.****
If anyone could indulge my curiosity, though, where are these 6 beeps coming from? I disabled all CTs and also copied the rpt.conf from node 2483, which has run as a hub for a couple of years, and yet it still bleeps at me! If it’s relevant, the test hub has a private node address and doesn’t register with AllStar.****
So, where’s the “beepy” bit? What’s it telling me?****
Ta loads.****
David****
*From:* Jim W7RY [mailto:w7ry@centurytel.net] *Sent:* 07 August 2013 05:26 *To:* Tim Sawyer; David Osborn *Cc:* app_rpt-users@ohnosec.org *Subject:* Re: [App_rpt-users] Bleeping Hub**** ** ** A node on VM Player works perfectly on a Windows 7 laptop. I have a node running on this Windows laptop.**** **** Why doesn't it work in VMWare?**** **** 73**** Jim W7RY**** **** **** *From:* Tim Sawyer <tim.sawyer@me.com>**** *Sent:* Tuesday, August 06, 2013 2:10 PM**** *To:* David Osborn <david.osborn@manx.net>**** *Cc:* app_rpt-users@ohnosec.org**** *Subject:* Re: [App_rpt-users] Bleeping Hub**** **** Running asterisk on a VM is a no, no... it's not supported... it doesn't work... forget it...**** -- Tim :wq**** **** On Aug 6, 2013, at 12:30 PM, David Osborn <david.osborn@manx.net> wrote:** **
**** Hey gang,**** **** Just goofing around, I wanted to see how well Allstar would play when configured as a hub node under VMWare.**** **** Well, it worked and I was able to make connections to other nodes, connect with IaxRPT and all that good stuff. The thing is, it likes to beep.**** **** When I connect the virtual hub to another node and then key that node, when I let go the button I get 6 rapid beeps followed by the courtesy beep from the node I’m accessing.**** **** I believe that these beeps are coming from the V-Hub, but can’t figure out why.**** **** Anyone got any ideas on this one?**** **** Thanks**** **** David – GD4HOZ**** **** **** _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users****
------------------------------ _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users