Hey gang, Just goofing around, I wanted to see how well Allstar would play when configured as a hub node under VMWare. Well, it worked and I was able to make connections to other nodes, connect with IaxRPT and all that good stuff. The thing is, it likes to beep. When I connect the virtual hub to another node and then key that node, when I let go the button I get 6 rapid beeps followed by the courtesy beep from the node I'm accessing. I believe that these beeps are coming from the V-Hub, but can't figure out why. Anyone got any ideas on this one? Thanks David - GD4HOZ
Running asterisk on a VM is a no, no... it's not supported... it doesn't work... forget it... -- Tim :wq On Aug 6, 2013, at 12:30 PM, David Osborn <david.osborn@manx.net> wrote:
Hey gang,
Just goofing around, I wanted to see how well Allstar would play when configured as a hub node under VMWare.
Well, it worked and I was able to make connections to other nodes, connect with IaxRPT and all that good stuff. The thing is, it likes to beep.
When I connect the virtual hub to another node and then key that node, when I let go the button I get 6 rapid beeps followed by the courtesy beep from the node I’m accessing.
I believe that these beeps are coming from the V-Hub, but can’t figure out why.
Anyone got any ideas on this one?
Thanks
David – GD4HOZ
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
A node on VM Player works perfectly on a Windows 7 laptop. I have a node running on this Windows laptop. Why doesn't it work in VMWare? 73 Jim W7RY From: Tim Sawyer Sent: Tuesday, August 06, 2013 2:10 PM To: David Osborn Cc: app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] Bleeping Hub Running asterisk on a VM is a no, no... it's not supported... it doesn't work... forget it... -- Tim :wq On Aug 6, 2013, at 12:30 PM, David Osborn <david.osborn@manx.net> wrote: Hey gang, Just goofing around, I wanted to see how well Allstar would play when configured as a hub node under VMWare. Well, it worked and I was able to make connections to other nodes, connect with IaxRPT and all that good stuff. The thing is, it likes to beep. When I connect the virtual hub to another node and then key that node, when I let go the button I get 6 rapid beeps followed by the courtesy beep from the node I’m accessing. I believe that these beeps are coming from the V-Hub, but can’t figure out why. Anyone got any ideas on this one? Thanks David – GD4HOZ _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users -------------------------------------------------------------------------------- _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
I omitted to clarify that this test was VMWare player and, to be honest, it does appear to sound and work OK, but I'll heed the advice that it may misbehave. If anyone could indulge my curiosity, though, where are these 6 beeps coming from? I disabled all CTs and also copied the rpt.conf from node 2483, which has run as a hub for a couple of years, and yet it still bleeps at me! If it's relevant, the test hub has a private node address and doesn't register with AllStar. So, where's the "beepy" bit? What's it telling me? Ta loads. David From: Jim W7RY [mailto:w7ry@centurytel.net] Sent: 07 August 2013 05:26 To: Tim Sawyer; David Osborn Cc: app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] Bleeping Hub A node on VM Player works perfectly on a Windows 7 laptop. I have a node running on this Windows laptop. Why doesn't it work in VMWare? 73 Jim W7RY From: Tim Sawyer <mailto:tim.sawyer@me.com> Sent: Tuesday, August 06, 2013 2:10 PM To: David Osborn <mailto:david.osborn@manx.net> Cc: app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] Bleeping Hub Running asterisk on a VM is a no, no... it's not supported... it doesn't work... forget it... -- Tim :wq On Aug 6, 2013, at 12:30 PM, David Osborn <david.osborn@manx.net> wrote: Hey gang, Just goofing around, I wanted to see how well Allstar would play when configured as a hub node under VMWare. Well, it worked and I was able to make connections to other nodes, connect with IaxRPT and all that good stuff. The thing is, it likes to beep. When I connect the virtual hub to another node and then key that node, when I let go the button I get 6 rapid beeps followed by the courtesy beep from the node I'm accessing. I believe that these beeps are coming from the V-Hub, but can't figure out why. Anyone got any ideas on this one? Thanks David - GD4HOZ _______________________________________________ App_rpt-users mailing list <mailto:App_rpt-users@ohnosec.org> App_rpt-users@ohnosec.org <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users _____ _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
Have you ever updated the source? https://allstarlink.org/support.html#astupgrade If not give it a try. -- Tim :wq On Aug 6, 2013, at 11:11 PM, David and Rhianne Osborn <david.osborn@manx.net> wrote:
I omitted to clarify that this test was VMWare player and, to be honest, it does appear to sound and work OK, but I’ll heed the advice that it may misbehave.
If anyone could indulge my curiosity, though, where are these 6 beeps coming from? I disabled all CTs and also copied the rpt.conf from node 2483, which has run as a hub for a couple of years, and yet it still bleeps at me! If it’s relevant, the test hub has a private node address and doesn’t register with AllStar.
So, where’s the “beepy” bit? What’s it telling me?
Ta loads.
David
From: Jim W7RY [mailto:w7ry@centurytel.net] Sent: 07 August 2013 05:26 To: Tim Sawyer; David Osborn Cc: app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] Bleeping Hub
A node on VM Player works perfectly on a Windows 7 laptop. I have a node running on this Windows laptop.
Why doesn't it work in VMWare?
73 Jim W7RY
From: Tim Sawyer Sent: Tuesday, August 06, 2013 2:10 PM To: David Osborn Cc: app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] Bleeping Hub
Running asterisk on a VM is a no, no... it's not supported... it doesn't work... forget it... -- Tim :wq
On Aug 6, 2013, at 12:30 PM, David Osborn <david.osborn@manx.net> wrote:
Hey gang,
Just goofing around, I wanted to see how well Allstar would play when configured as a hub node under VMWare.
Well, it worked and I was able to make connections to other nodes, connect with IaxRPT and all that good stuff. The thing is, it likes to beep.
When I connect the virtual hub to another node and then key that node, when I let go the button I get 6 rapid beeps followed by the courtesy beep from the node I’m accessing.
I believe that these beeps are coming from the V-Hub, but can’t figure out why.
Anyone got any ideas on this one?
Thanks
David – GD4HOZ
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
I had some weird noises coming from a node I installed on VMplayer on my windows 7 machine aswell. In speaking with a few VM gurus they believed it was the time slicing VMplayer does that was causing it, and I was trying to use a URI. Now, your mileage may very, but I have a HUB node and a URIx connected to my Proxmox <http://www.proxmox.com/proxmox-ve> server and both work flawless. I did not do any custom modification to the install, but I did have to map the USB device to my Allstar VM through Proxmox. Monty On Wed, Aug 7, 2013 at 7:07 AM, Tim Sawyer <tim.sawyer@me.com> wrote:
Have you ever updated the source? https://allstarlink.org/support.html#astupgrade If not give it a try. -- Tim :wq
On Aug 6, 2013, at 11:11 PM, David and Rhianne Osborn < david.osborn@manx.net> wrote:
I omitted to clarify that this test was VMWare player and, to be honest, it does appear to sound and work OK, but I’ll heed the advice that it may misbehave.****
If anyone could indulge my curiosity, though, where are these 6 beeps coming from? I disabled all CTs and also copied the rpt.conf from node 2483, which has run as a hub for a couple of years, and yet it still bleeps at me! If it’s relevant, the test hub has a private node address and doesn’t register with AllStar.****
So, where’s the “beepy” bit? What’s it telling me?****
Ta loads.****
David****
*From:* Jim W7RY [mailto:w7ry@centurytel.net] *Sent:* 07 August 2013 05:26 *To:* Tim Sawyer; David Osborn *Cc:* app_rpt-users@ohnosec.org *Subject:* Re: [App_rpt-users] Bleeping Hub**** ** ** A node on VM Player works perfectly on a Windows 7 laptop. I have a node running on this Windows laptop.**** **** Why doesn't it work in VMWare?**** **** 73**** Jim W7RY**** **** **** *From:* Tim Sawyer <tim.sawyer@me.com>**** *Sent:* Tuesday, August 06, 2013 2:10 PM**** *To:* David Osborn <david.osborn@manx.net>**** *Cc:* app_rpt-users@ohnosec.org**** *Subject:* Re: [App_rpt-users] Bleeping Hub**** **** Running asterisk on a VM is a no, no... it's not supported... it doesn't work... forget it...**** -- Tim :wq**** **** On Aug 6, 2013, at 12:30 PM, David Osborn <david.osborn@manx.net> wrote:** **
**** Hey gang,**** **** Just goofing around, I wanted to see how well Allstar would play when configured as a hub node under VMWare.**** **** Well, it worked and I was able to make connections to other nodes, connect with IaxRPT and all that good stuff. The thing is, it likes to beep.**** **** When I connect the virtual hub to another node and then key that node, when I let go the button I get 6 rapid beeps followed by the courtesy beep from the node I’m accessing.**** **** I believe that these beeps are coming from the V-Hub, but can’t figure out why.**** **** Anyone got any ideas on this one?**** **** Thanks**** **** David – GD4HOZ**** **** **** _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users****
------------------------------ _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
On Aug 7, 2013, at 12:36 PM, Monty <monty@ke7jvx.com> wrote:
I had some weird noises coming from a node I installed on VMplayer on my windows 7 machine aswell. In speaking with a few VM gurus they believed it was the time slicing VMplayer does that was causing it, and I was trying to use a URI. Now, your mileage may very, but I have a HUB node and a URIx connected to my Proxmox server and both work flawless. I did not do any custom modification to the install, but I did have to map the USB device to my Allstar VM through Proxmox.
Monty
On Wed, Aug 7, 2013 at 7:07 AM, Tim Sawyer <tim.sawyer@me.com> wrote: Have you ever updated the source? https://allstarlink.org/support.html#astupgrade If not give it a try. -- Tim :wq
On Aug 6, 2013, at 11:11 PM, David and Rhianne Osborn <david.osborn@manx.net> wrote:
I omitted to clarify that this test was VMWare player and, to be honest, it does appear to sound and work OK, but I’ll heed the advice that it may misbehave.
If anyone could indulge my curiosity, though, where are these 6 beeps coming from? I disabled all CTs and also copied the rpt.conf from node 2483, which has run as a hub for a couple of years, and yet it still bleeps at me! If it’s relevant, the test hub has a private node address and doesn’t register with AllStar.
So, where’s the “beepy” bit? What’s it telling me?
Ta loads.
David
From: Jim W7RY [mailto:w7ry@centurytel.net] Sent: 07 August 2013 05:26 To: Tim Sawyer; David Osborn Cc: app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] Bleeping Hub
A node on VM Player works perfectly on a Windows 7 laptop. I have a node running on this Windows laptop.
Why doesn't it work in VMWare?
73 Jim W7RY
From: Tim Sawyer Sent: Tuesday, August 06, 2013 2:10 PM To: David Osborn Cc: app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] Bleeping Hub
Running asterisk on a VM is a no, no... it's not supported... it doesn't work... forget it... -- Tim :wq
On Aug 6, 2013, at 12:30 PM, David Osborn <david.osborn@manx.net> wrote:
Hey gang,
Just goofing around, I wanted to see how well Allstar would play when configured as a hub node under VMWare.
Well, it worked and I was able to make connections to other nodes, connect with IaxRPT and all that good stuff. The thing is, it likes to beep.
When I connect the virtual hub to another node and then key that node, when I let go the button I get 6 rapid beeps followed by the courtesy beep from the node I’m accessing.
I believe that these beeps are coming from the V-Hub, but can’t figure out why.
Anyone got any ideas on this one?
Thanks
David – GD4HOZ
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
participants (6)
-
David and Rhianne Osborn -
David Osborn
-
Jim W7RY -
Matthew Dodd -
Monty -
Tim Sawyer