Yes, you can do this. I had an AllStar-independent demonstration repeater set up with two phones connected via a SIP ATA, and that worked just fine. How are you invoking the Rpt application in the extension that would connect your SIP phone to the repeater? You have to use either the reverse-autopatch option or one of the "phone control mode" options... but one of those should provide an acceptable solution for connecting a SIP or Zaptel channel to the repeater. The doc snippet below should give you the basic idea - ************ Rannounce-string[|timeout[|timeout-destination]] - Amateur Radio Reverse Autopatch. Caller is put on hold, and announcement (as specified by the 'announce-string') is played on radio system. Users of radio system can access autopatch, dial specified code, and pick up call. Announce-string is list of names of recordings, or \"PARKED\" to substitute code for un-parking, or \"NODE\" to substitute node number. P - Phone Control mode. This allows a regular phone user to have full control and audio access to the radio system. For the user to have DTMF control, the 'phone_functions' parameter must be specified for the node in 'rpt.conf'. An additional function (cop,6) must be listed so that PTT control is available. D - Dumb Phone Control mode. This allows a regular phone user to have full control and audio access to the radio system. In this mode, the PTT is activated for the entire length of the call. For the user to have DTMF control (not generally recomended in this mode), the 'dphone_functions' parameter must be specified for the node in 'rpt.conf'. Otherwise no DTMF control will be available to the phone user. ************ 73 de Josh KI4ITI On 01/13/2012 05:18 AM, Ryan Collier wrote:
Greeting Group,
I finally got my repeater back up do to hardware failure. But I am trying to add to the system to get more control over it. So I have setup sip softphones on my computers. They all talk to eachother fine after my blonde moment. (hand on forehead)
So what I am trying to accomplish is to be able to use the sip softphones on the repeater system with out having to connect to the allstar sip network. Because the repeater will still work with out the WAN hookup. If we loose internet and the hsmm-mesh is hooked up I want the sip phones to still work on my internal system. When I do connect a sip phone to the repeater channel I get this error. We only accept links via IAX2, Echolink, IRLP or Local!!
Is there a way I can make this work or am I beating a dead horse?
73 Ryan KB8PMY
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users