I run it on my UHF machine and am quite happy with it. Randy, KB3HJC, also runs it on his Carlisle, PA repeater with 2 voting receivers. Once I get data to my VHF repeater site that will also have voting receivers attached to it. It works quite well! Corey N3FE ________________________________________ From: app_rpt-users-bounces@ohnosec.org [app_rpt-users-bounces@ohnosec.org] On Behalf Of Robert a. Poff [wb3awj@comcast.net] Sent: Friday, March 15, 2013 10:55 PM To: Ron Simpson; app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] Looking for the XIPAR experts I ran some tests using the XIPAR voting. Works just fine. I'd say equivalent performance to a Doug Hall voter. Not very hard at all to set up. Just follow what it says here: http://www.xelatec.com/xipar/simplevoter or here: http://www.allstarnode.com/viewtopic.php?f=5&t=33 WB3AWJ Allstar 27784, etc. -- Sent from my Android phone with K-9 Mail. Please excuse my brevity. -- This message was scanned and is believed to be clean. Click here to report this message as spam.<http://simba.repeater.net:8080/cgi-bin/learn-msg.cgi?id=5C3B71FA3.AE1D2>