Mine are the same, blobbed, just like the pictures on the DealExtreme page. Steve On 9/29/2011 9:37, Corey Dean wrote:
I can tell you it is blobbed but I could use these for remote receivers using the Xiapr install if it was supported.
I just pulled this out of my desk and reading it from backtrac.
ID 0c76:1607 JMTek, LLC. audio controller
Corey N3FE ________________________________________ From: app_rpt-users-bounces@ohnosec.org [app_rpt-users-bounces@ohnosec.org] On Behalf Of Andrew Errington [a.errington@lancaster.ac.uk] Sent: Thursday, September 29, 2011 3:39 AM To: app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] installation disk
On Thu, 29 Sep 2011 03:17:01 Corey Dean wrote:
These are the ones I ordered when I started in this. I ordered 3 and a friend ordered some as well. They were all the wrong chip. What chip did you end up with? Can you post the VID:PID please? Is the chip packaged (I/O pins accessible), or epoxy blobbed?
Sorry for so many questions, but I have been experimenting with a CM108 compatible chip for a related application.
73,
Andrew _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
-- This message was scanned and is believed to be clean. Click here to report this message as spam. http://simba.repeater.net/cgi-bin/learn-msg.cgi?id=F3C582398.A75C6 _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users