Re: [App_rpt-users] installation disk
No, your not spinning your wheels. Check out the URI at the URL below. Or if you'd rather roll your own the Startech (http://www.newegg.com/Product/Product.aspx?Item=N82E16829128004) is a viable option. -- Tim On Sep 27, 2011, at 12:18 PM, Bradley Haney wrote:
So i guess i am kind of spinning my wheels trying to load up a computer of this software if i can't interface my radio unless i have a lox/beagle board .. WHen will the thin client be available?
On Tue, Sep 27, 2011 at 1:54 PM, Bradley Haney <kc9gqr@gmail.com> wrote: OK i thought it went throught the computer's sound card.
On Tue, Sep 27, 2011 at 12:55 PM, Tim Sawyer <tim.sawyer@me.com> wrote: The only supported audio is through USB, the too-expensive QuadPCI card, a LOX/Beagle board, or the soon to be released thin client. -- Tim :wq
On Sep 27, 2011, at 9:50 AM, Bradley Haney wrote:
Yep, no porblem wiping out the computer.. I will get a new some new dvd's or cd's and try it again tonight maybe that is the issue.. As for the interface basically was just wanting to know if you can use a serial port instead of a USB port..
Thanks for your help.
On Tue, Sep 27, 2011 at 11:46 AM, Tim Sawyer <tim.sawyer@me.com> wrote: You are aware that the ACID install will wipe out your Windows load?
It doesn't mater if you drag it or click it as long as it shows up in the left pane of Disk Utility.
I don't think it maters that it's a 32 bit motherboard.
I don't know what a rascall interface is. Interfaces which I know to work are the DMK Engineering URI (http://dmkeng.com/URI_Order_Page.htm), modified USB sound fobs as detailed on the Drupal web site (http://ohnosec.org/drupal/node/27) and PLRI board (http://www.qsl.net/k0kn/plri.html)
Most of this stuff is documented on either https://allstarlink.org/ or http://ohnosec.org/drupal/
Let us know how it goes. -- Tim :wq
On Sep 27, 2011, at 7:41 AM, Bradley Haney wrote:
i will try it that way of dragging it.. I used the disk utility but i think i clicked on the DMG image and burned that.. I will give it another shot.. The computer i am using is a compaq computer that has windows xp but its a 32 bit mother board will that matter? Also will i be able to use my rascall interface or will i have to purchase a different adapter..
On Tue, Sep 27, 2011 at 8:30 AM, Tim Sawyer <tim.sawyer@me.com> wrote: Did you use the Disk Utility application to burn the iso image or the Finder? Finder will just copy the image onto the CD, which won't be bootable. Open Disk Utility and then drag the iso image into the left pane, make sure it is highlighted and press the burn icon.
-- Tim
On Sep 26, 2011, at 8:54 PM, Bradley Haney wrote:
For some reason i burned the iso image on my mac and put the new dvd in the windows computer to load up but for some reason it tries to read and then does nothing.. I have already went into the bios to set up to boot from CD rom but no joy.. I then booted that machine into windows and i was able to read the disk so i know the DVD drive is working but still can't get the computer to boot .. is there a installation disc i can just purchase. also has anyone used a rascal interface with this system?
Bradley Kc9gqr _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
I've used these successfully http://www.dealextreme.com/p/c-media-cm108-virtual-7-1-surround-usb-2-0-exte... $6.99 sungle with shipping. 3 units for $6.04 each, 5 for $5.84 each, all includes shipping. But (one more pitch) you do not need to modify if you just use the FOB for audio and use the parallel port for COR and PTT. GeorgeC ----- Original Message ----- From: Tim Sawyer To: App_rpt-users@ohnosec.org Cc: Bradley Haney Sent: Tuesday, September 27, 2011 8:09 PM Subject: Re: [App_rpt-users] installation disk No, your not spinning your wheels. Check out the URI at the URL below. Or if you'd rather roll your own the Startech (http://www.newegg.com/Product/Product.aspx?Item=N82E16829128004) is a viable option. -- Tim On Sep 27, 2011, at 12:18 PM, Bradley Haney wrote: So i guess i am kind of spinning my wheels trying to load up a computer of this software if i can't interface my radio unless i have a lox/beagle board .. WHen will the thin client be available? On Tue, Sep 27, 2011 at 1:54 PM, Bradley Haney <kc9gqr@gmail.com> wrote: OK i thought it went throught the computer's sound card. On Tue, Sep 27, 2011 at 12:55 PM, Tim Sawyer <tim.sawyer@me.com> wrote: The only supported audio is through USB, the too-expensive QuadPCI card, a LOX/Beagle board, or the soon to be released thin client. -- Tim :wq On Sep 27, 2011, at 9:50 AM, Bradley Haney wrote: Yep, no porblem wiping out the computer.. I will get a new some new dvd's or cd's and try it again tonight maybe that is the issue.. As for the interface basically was just wanting to know if you can use a serial port instead of a USB port.. Thanks for your help. On Tue, Sep 27, 2011 at 11:46 AM, Tim Sawyer <tim.sawyer@me.com> wrote: You are aware that the ACID install will wipe out your Windows load? It doesn't mater if you drag it or click it as long as it shows up in the left pane of Disk Utility. I don't think it maters that it's a 32 bit motherboard. I don't know what a rascall interface is. Interfaces which I know to work are the DMK Engineering URI (http://dmkeng.com/URI_Order_Page.htm), modified USB sound fobs as detailed on the Drupal web site (http://ohnosec.org/drupal/node/27) and PLRI board (http://www.qsl.net/k0kn/plri.html) Most of this stuff is documented on either https://allstarlink.org/ or http://ohnosec.org/drupal/ Let us know how it goes. -- Tim :wq On Sep 27, 2011, at 7:41 AM, Bradley Haney wrote: i will try it that way of dragging it.. I used the disk utility but i think i clicked on the DMG image and burned that.. I will give it another shot.. The computer i am using is a compaq computer that has windows xp but its a 32 bit mother board will that matter? Also will i be able to use my rascall interface or will i have to purchase a different adapter.. On Tue, Sep 27, 2011 at 8:30 AM, Tim Sawyer <tim.sawyer@me.com> wrote: Did you use the Disk Utility application to burn the iso image or the Finder? Finder will just copy the image onto the CD, which won't be bootable. Open Disk Utility and then drag the iso image into the left pane, make sure it is highlighted and press the burn icon. -- Tim On Sep 26, 2011, at 8:54 PM, Bradley Haney wrote: For some reason i burned the iso image on my mac and put the new dvd in the windows computer to load up but for some reason it tries to read and then does nothing.. I have already went into the bios to set up to boot from CD rom but no joy.. I then booted that machine into windows and i was able to read the disk so i know the DVD drive is working but still can't get the computer to boot .. is there a installation disc i can just purchase. also has anyone used a rascal interface with this system? Bradley Kc9gqr _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
These are the ones I ordered when I started in this. I ordered 3 and a friend ordered some as well. They were all the wrong chip. The newegg cm108's have worked everytime for me. Corey N3FE ________________________________________ From: app_rpt-users-bounces@ohnosec.org [app_rpt-users-bounces@ohnosec.org] On Behalf Of George Csahanin [george@dyb.com] Sent: Tuesday, September 27, 2011 10:15 PM To: Tim Sawyer; App_rpt-users@ohnosec.org Cc: Bradley Haney Subject: Re: [App_rpt-users] installation disk I've used these successfully http://www.dealextreme.com/p/c-media-cm108-virtual-7-1-surround-usb-2-0-exte... $6.99 sungle with shipping. 3 units for $6.04 each, 5 for $5.84 each, all includes shipping. But (one more pitch) you do not need to modify if you just use the FOB for audio and use the parallel port for COR and PTT. GeorgeC ----- Original Message ----- From: Tim Sawyer<mailto:tim.sawyer@me.com> To: App_rpt-users@ohnosec.org<mailto:App_rpt-users@ohnosec.org> Cc: Bradley Haney<mailto:kc9gqr@gmail.com> Sent: Tuesday, September 27, 2011 8:09 PM Subject: Re: [App_rpt-users] installation disk No, your not spinning your wheels. Check out the URI at the URL below. Or if you'd rather roll your own the Startech (http://www.newegg.com/Product/Product.aspx?Item=N82E16829128004) is a viable option. -- Tim On Sep 27, 2011, at 12:18 PM, Bradley Haney wrote: So i guess i am kind of spinning my wheels trying to load up a computer of this software if i can't interface my radio unless i have a lox/beagle board .. WHen will the thin client be available? On Tue, Sep 27, 2011 at 1:54 PM, Bradley Haney <kc9gqr@gmail.com<mailto:kc9gqr@gmail.com>> wrote: OK i thought it went throught the computer's sound card. On Tue, Sep 27, 2011 at 12:55 PM, Tim Sawyer <tim.sawyer@me.com<mailto:tim.sawyer@me.com>> wrote: The only supported audio is through USB, the too-expensive QuadPCI card, a LOX/Beagle board, or the soon to be released thin client. -- Tim :wq On Sep 27, 2011, at 9:50 AM, Bradley Haney wrote: Yep, no porblem wiping out the computer.. I will get a new some new dvd's or cd's and try it again tonight maybe that is the issue.. As for the interface basically was just wanting to know if you can use a serial port instead of a USB port.. Thanks for your help. On Tue, Sep 27, 2011 at 11:46 AM, Tim Sawyer <tim.sawyer@me.com<mailto:tim.sawyer@me.com>> wrote: You are aware that the ACID install will wipe out your Windows load? It doesn't mater if you drag it or click it as long as it shows up in the left pane of Disk Utility. I don't think it maters that it's a 32 bit motherboard. I don't know what a rascall interface is. Interfaces which I know to work are the DMK Engineering URI (http://dmkeng.com/URI_Order_Page.htm), modified USB sound fobs as detailed on the Drupal web site (http://ohnosec.org/drupal/node/27) and PLRI board (http://www.qsl.net/k0kn/plri.html) Most of this stuff is documented on either https://allstarlink.org/ or http://ohnosec.org/drupal/ Let us know how it goes. -- Tim :wq On Sep 27, 2011, at 7:41 AM, Bradley Haney wrote: i will try it that way of dragging it.. I used the disk utility but i think i clicked on the DMG image and burned that.. I will give it another shot.. The computer i am using is a compaq computer that has windows xp but its a 32 bit mother board will that matter? Also will i be able to use my rascall interface or will i have to purchase a different adapter.. On Tue, Sep 27, 2011 at 8:30 AM, Tim Sawyer <tim.sawyer@me.com<mailto:tim.sawyer@me.com>> wrote: Did you use the Disk Utility application to burn the iso image or the Finder? Finder will just copy the image onto the CD, which won't be bootable. Open Disk Utility and then drag the iso image into the left pane, make sure it is highlighted and press the burn icon. -- Tim On Sep 26, 2011, at 8:54 PM, Bradley Haney wrote: For some reason i burned the iso image on my mac and put the new dvd in the windows computer to load up but for some reason it tries to read and then does nothing.. I have already went into the bios to set up to boot from CD rom but no joy.. I then booted that machine into windows and i was able to read the disk so i know the DVD drive is working but still can't get the computer to boot .. is there a installation disc i can just purchase. also has anyone used a rascal interface with this system? Bradley Kc9gqr _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org<mailto:App_rpt-users@ohnosec.org> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users -- This message was scanned and is believed to be clean. Click here to report this message as spam.<http://simba.repeater.net:8080/cgi-bin/learn-msg.cgi?id=73D042956.A8287>
On Thu, 29 Sep 2011 03:17:01 Corey Dean wrote:
These are the ones I ordered when I started in this. I ordered 3 and a friend ordered some as well. They were all the wrong chip.
What chip did you end up with? Can you post the VID:PID please? Is the chip packaged (I/O pins accessible), or epoxy blobbed? Sorry for so many questions, but I have been experimenting with a CM108 compatible chip for a related application. 73, Andrew
I can tell you it is blobbed but I could use these for remote receivers using the Xiapr install if it was supported. I just pulled this out of my desk and reading it from backtrac. ID 0c76:1607 JMTek, LLC. audio controller Corey N3FE ________________________________________ From: app_rpt-users-bounces@ohnosec.org [app_rpt-users-bounces@ohnosec.org] On Behalf Of Andrew Errington [a.errington@lancaster.ac.uk] Sent: Thursday, September 29, 2011 3:39 AM To: app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] installation disk On Thu, 29 Sep 2011 03:17:01 Corey Dean wrote:
These are the ones I ordered when I started in this. I ordered 3 and a friend ordered some as well. They were all the wrong chip.
What chip did you end up with? Can you post the VID:PID please? Is the chip packaged (I/O pins accessible), or epoxy blobbed? Sorry for so many questions, but I have been experimenting with a CM108 compatible chip for a related application. 73, Andrew _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users -- This message was scanned and is believed to be clean. Click here to report this message as spam. http://simba.repeater.net/cgi-bin/learn-msg.cgi?id=F3C582398.A75C6
Mine are the same, blobbed, just like the pictures on the DealExtreme page. Steve On 9/29/2011 9:37, Corey Dean wrote:
I can tell you it is blobbed but I could use these for remote receivers using the Xiapr install if it was supported.
I just pulled this out of my desk and reading it from backtrac.
ID 0c76:1607 JMTek, LLC. audio controller
Corey N3FE ________________________________________ From: app_rpt-users-bounces@ohnosec.org [app_rpt-users-bounces@ohnosec.org] On Behalf Of Andrew Errington [a.errington@lancaster.ac.uk] Sent: Thursday, September 29, 2011 3:39 AM To: app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] installation disk
On Thu, 29 Sep 2011 03:17:01 Corey Dean wrote:
These are the ones I ordered when I started in this. I ordered 3 and a friend ordered some as well. They were all the wrong chip. What chip did you end up with? Can you post the VID:PID please? Is the chip packaged (I/O pins accessible), or epoxy blobbed?
Sorry for so many questions, but I have been experimenting with a CM108 compatible chip for a related application.
73,
Andrew _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
-- This message was scanned and is believed to be clean. Click here to report this message as spam. http://simba.repeater.net/cgi-bin/learn-msg.cgi?id=F3C582398.A75C6 _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
Just a warning. I have 4 of those exact units I ordered from DealExtreme about a year ago and they do not have a C-Media chip in them, they are unuseable for app_rpt. They even say CM-108 on the package. Steve On 9/27/2011 19:15, George Csahanin wrote:
I've used these successfully http://www.dealextreme.com/p/c-media-cm108-virtual-7-1-surround-usb-2-0-exte... $6.99 sungle with shipping. 3 units for $6.04 each, 5 for $5.84 each, all includes shipping. But (one more pitch) you do not need to modify if you just use the FOB for audio and use the parallel port for COR and PTT. GeorgeC
----- Original Message ----- *From:* Tim Sawyer <mailto:tim.sawyer@me.com> *To:* App_rpt-users@ohnosec.org <mailto:App_rpt-users@ohnosec.org> *Cc:* Bradley Haney <mailto:kc9gqr@gmail.com> *Sent:* Tuesday, September 27, 2011 8:09 PM *Subject:* Re: [App_rpt-users] installation disk
No, your not spinning your wheels. Check out the URI at the URL below. Or if you'd rather roll your own the Startech (http://www.newegg.com/Product/Product.aspx?Item=N82E16829128004) is a viable option.
-- Tim
On Sep 27, 2011, at 12:18 PM, Bradley Haney wrote:
So i guess i am kind of spinning my wheels trying to load up a computer of this software if i can't interface my radio unless i have a lox/beagle board .. WHen will the thin client be available?
On Tue, Sep 27, 2011 at 1:54 PM, Bradley Haney <kc9gqr@gmail.com <mailto:kc9gqr@gmail.com>> wrote:
OK i thought it went throught the computer's sound card.
On Tue, Sep 27, 2011 at 12:55 PM, Tim Sawyer <tim.sawyer@me.com <mailto:tim.sawyer@me.com>> wrote:
The only supported audio is through USB, the too-expensive QuadPCI card, a LOX/Beagle board, or the soon to be released thin client. -- Tim :wq
On Sep 27, 2011, at 9:50 AM, Bradley Haney wrote:
Yep, no porblem wiping out the computer.. I will get a new some new dvd's or cd's and try it again tonight maybe that is the issue.. As for the interface basically was just wanting to know if you can use a serial port instead of a USB port.. Thanks for your help.
On Tue, Sep 27, 2011 at 11:46 AM, Tim Sawyer <tim.sawyer@me.com <mailto:tim.sawyer@me.com>> wrote:
You are aware that the ACID install will wipe out your Windows load?
It doesn't mater if you drag it or click it as long as it shows up in the left pane of Disk Utility.
I don't think it maters that it's a 32 bit motherboard.
I don't know what a rascall interface is. Interfaces which I know to work are the DMK Engineering URI (http://dmkeng.com/URI_Order_Page.htm), modified USB sound fobs as detailed on the Drupal web site (http://ohnosec.org/drupal/node/27) and PLRI board (http://www.qsl.net/k0kn/plri.html)
Most of this stuff is documented on either https://allstarlink.org/ or http://ohnosec.org/drupal/
Let us know how it goes. -- Tim :wq
On Sep 27, 2011, at 7:41 AM, Bradley Haney wrote:
i will try it that way of dragging it.. I used the disk utility but i think i clicked on the DMG image and burned that.. I will give it another shot.. The computer i am using is a compaq computer that has windows xp but its a 32 bit mother board will that matter? Also will i be able to use my rascall interface or will i have to purchase a different adapter..
On Tue, Sep 27, 2011 at 8:30 AM, Tim Sawyer <tim.sawyer@me.com <mailto:tim.sawyer@me.com>> wrote:
Did you use the Disk Utility application to burn the iso image or the Finder? Finder will just copy the image onto the CD, which won't be bootable. Open Disk Utility and then drag the iso image into the left pane, make sure it is highlighted and press the burn icon.
-- Tim
On Sep 26, 2011, at 8:54 PM, Bradley Haney wrote:
For some reason i burned the iso image on my mac and put the new dvd in the windows computer to load up but for some reason it tries to read and then does nothing.. I have already went into the bios to set up to boot from CD rom but no joy.. I then booted that machine into windows and i was able to read the disk so i know the DVD drive is working but still can't get the computer to boot .. is there a installation disc i can just purchase. also has anyone used a rascal interface with this system?
Bradley Kc9gqr _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org <mailto:App_rpt-users@ohnosec.org> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
participants (5)
-
Andrew Errington -
Corey Dean -
George Csahanin -
Steve Passmore -
Tim Sawyer