This board is for when your controller has only one port or no free ports. If you have a free port, app_rpt works perfectly fine with your existing controller. Just set duplex=0 and linktolink=yes. --- TIS On Feb 3, 2011, at 8:15 AM, Jim Duuuude wrote: Not necessarily. We have a simple board (user-buildable project) that does that very nicely. I you have a standalone repater already hooked up to a controller this board can be put in-between them and it makes it into a very nice adjunct. JIM WB6NIL Date: Thu, 3 Feb 2011 11:09:34 -0500 From: kc2wdz@gmail.com To: app_rpt-users@ohnosec.org Subject: [App_rpt-users] app-rpt with external repeater controller possible? Is it possible to use a repeaters external controller and just use app-rpt for it's linking capabilities? I'm guessing there would be no way of avoiding the repeater id's and messages being sent out to any linked repeater nodes. _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.orghttp://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users