Hi Travis, In rpt.conf there is a section called wait-times. Here is a copy of the section I have in my rpt.conf file: (located in the node definition stanza near the top of rpt.conf, under the node number) wait_times=wait-times ; Wait times (then located between the [morse] stanza and the [node] stanza) ; ; This section allows wait times for telemetry events to be adjusted ; A section for wait times can be defined for every repeater ; [wait-times] telemwait=500 ; Time to wait before sending most telemetry idwait=500 ; Time to wait before starting ID unkeywait=500 ; Time to wait after unkey before sending CT's and link telemetry calltermwait=2000 ; Time to wait before announcing "call terminated" Adjust the telemwait delay to suit your needs. Cheers Matt G4RKY On 1 October 2011 23:34, Travis Best <w3tmb1@gmail.com> wrote:
Is there a way to delay the messages the XIPAR server put over the air?? The problem I am having is for example if I send the *81 command to get the current time I will only hear the min's because it is not keyed up long enough before it starts talking.
Thanks for any help W3TMB Travis ______________________________**_________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/**mailman/listinfo/app_rpt-users<http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users>