Yeah I couldn’t get DTMF to pass to the repeater to do an old fashioned reboot to the system.. We might just have to put a tot timer back on the cm200’s What concerns me about this is how random it occurred again we had no issues up until Sunday makes me wonder if its not hardware that has gone bad some where along the line in process.. At the moment I am using another motherboard and processor along with new sticks of ram and a different SSD.. Considering doing some test over the next week prior to putting my repeaters back online.. If you wish to sort through what I have recovered and give me your thoughts and opinions of what went wrong please do! Here is the information that I have gathered.. Again was not able to access /var/log/ folder But I did capture all audio files from the archive directory.. The /var/log folder was my mistake I was trying to rush things.. Here are examples of my configs.. Rpt.conf https://pastebin.com/WDAGgk7b iax.conf https://pastebin.com/eBErVMS4 modules.conf https://pastebin.com/zKyZhfE1 Extensions.conf https://pastebin.com/6hhzB5bc usbradio.conf https://pastebin.com/TppFdCEE usbradio_tune_usb40875 (2 Meter Repeater) https://pastebin.com/Gxqwe6Nx usbradio_tune_usb29925 (70cm Repeater) https://pastebin.com/yZF7cceh Computer type and information: Intel Atom D2700 @ 2.13GHz Memory 4GB Intel SSD Pico Power Supply 12 Here is Audio files and other customized scripts. http://lorentedford.com/temp2017/RepeaterFailure/ Here are some photos. Pico 12 Volt Atx power supply: http://lorentedford.com/wp-content/uploads/2018/04/IMG_20180423_124036615.jp... http://lorentedford.com/wp-content/uploads/2018/04/IMG_20180423_124020048.jp... We assume it is working correctly it is powering the motherboard and hard drives all voltages seem to match everything. DMKENG URI units: http://lorentedford.com/wp-content/uploads/2018/04/IMG_20180423_124127518.jp... http://lorentedford.com/wp-content/uploads/2018/04/IMG_20180423_124121409.jp... http://lorentedford.com/wp-content/uploads/2018/04/IMG_20180423_124115312.jp... At the moment these units seem like they are functioning properly. Motherboard and Ram Photos: http://lorentedford.com/wp-content/uploads/2018/04/IMG_20180423_123853044.jp... http://lorentedford.com/wp-content/uploads/2018/04/IMG_20180423_123902483.jp... http://lorentedford.com/wp-content/uploads/2018/04/IMG_20180423_123913316.jp... At the moment I feel the motherboard and processor combination is working ok. Still doing some more tests.. I am looking for a Linux based Benchmark software to push this unit in order to find issues.. Intel SSD: http://lorentedford.com/wp-content/uploads/2018/04/IMG_20180423_123924654.jp... I am questioning this hard drive after all it is one of the earlier generation SSD’s Again I want to thank everyone for the help so far in ideas! Loren Tedford (KC9ZHV) Phone Main: 1+ (631) 686 – 8878 Option 1 Fax: 1-618-551-2755 Email: loren@lorentedford.com Email: KC9ZHV@KC9ZHV.com http://www.lorentedford.com http://www.kc9zhv.com http://forum.kc9zhv.com http://hub.kc9zhv.com http://Ltcraft.net http://voipham.com From: Steve Mahler Sent: Monday, April 23, 2018 10:51 AM To: app_rpt-users@lists.allstarlink.org Subject: Re: [App_rpt-users] Repeater Stuck Locked open for 18 hrs I haven't had a stuck PTT on either AllStar controller. But, I do have a DTMF command that executes a Linux reboot. In rpt.conf it looks like ... 81234=cmd,/sbin/reboot It seems to work OK. It might work on PTT stuck if the receiver is still listening and some of the software is functional. ...STeve - KF5VH On 4/23/2018 10:04 AM, Kevin Custer wrote: On 4/23/2018 10:47 AM, Loren Tedford wrote: Good point Keven! We are using DmKeng URIx for both repeaters on the computer.. At the time of arrival out at the repeater site.. 2 meter repeater was not stuck in the open position but the UHF repeater was stuck open with Red light on on the URIx I do not believe the green heart beat was flashing we think it was solid.. Mark doesn’t remember other than the red led was solid.. There are no versions of Asterisk/app_rpt along with hardware that are stable enough to prevent this condition from ever happening. You may want to consider a radio adapter that disables the PTT when the application has crashed or stopped, there's a hardware malfunction, or a communications issue with the radio adapter. The URI doesn't currently have this functionality, but there are several others that do. Kevin _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. Virus-free. www.avast.com