I am trying to install ACID over the XIPAR install on a Compaq Evo N610C laptop. The install process hangs at "running /sbin/loader". I have tried a few of the remedies suggested for the same problem with other distros, but no luck. Any ideas? 73 de W4SKI On Nov 15, 2012 12:00 PM, <app_rpt-users-request@ohnosec.org> wrote:
Send App_rpt-users mailing list submissions to app_rpt-users@ohnosec.org
To subscribe or unsubscribe via the World Wide Web, visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users or, via email, send a message with subject or body 'help' to app_rpt-users-request@ohnosec.org
You can reach the person managing the list at app_rpt-users-owner@ohnosec.org
When replying, please edit your Subject line so it is more specific than "Re: Contents of App_rpt-users digest..."
Today's Topics:
1. Lost conn to RTCM (Fran) 2. RTCM for Sale (Jim W7RY) 3. Re: RTCM for Sale (Jim W7RY) 4. Node Freezing (Steve Schulze)
----------------------------------------------------------------------
Message: 1 Date: Wed, 14 Nov 2012 17:46:47 -0800 (PST) From: Fran <baldwin88@yahoo.com> To: "App_rpt-users@ohnosec.org" <App_rpt-users@ohnosec.org> Subject: [App_rpt-users] Lost conn to RTCM Message-ID: <1352944007.82204.YahooMailNeo@web120302.mail.ne1.yahoo.com> Content-Type: text/plain; charset="iso-8859-1"
I lost connection to my 2 remote RTCM units....Recently my router was rebooted by accident and it went back to all default settings, my IP changed. I reloaded all the port forwarding info but still cant connect to my 2 remote RTCM units. ? I checked the RTCM settings and the only thing I can think of is that the Voter Server Address was hard coded with my Old IP, however reading the RTCM manual it states the following:? The RTCM does a DNS resolution once per minute and resolves the IP address for the RTCM server, based upon the FQDN specified in this configuration. Therefore, the actual IP address of the RTCM server may be changed (and its associated DNS entry), and the RTCM firmware will continue to be aware of its current IP address (thus not requiring re-configuration of the RTCM firmware if the IP address of the RTCM server changes). ? ? So even if my IP on my router changed shouldnt it be transparent to the RTCM????? ? Frank