I suppose you could validly call it an "issue" :-). Some (certainly *not* all) NAT devices (such as cable/dsl routers, etc) do *not* have the ability for a device on the LAN side to access another device on the LAN side through its WAN address. Obviously, the WebTransceiver connects you to a node's public IP address (WAN side of a NAT device). Unfortunately, this is just a shortcoming of these NAT devices. If it really is a problem, I suggest finding one that performs that routing function successfully. JIM WB6NIL
Date: Sat, 24 Sep 2011 07:58:34 +0930 From: michaelcarey@internode.on.net To: pd_fus@me.com CC: App_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] Connecting to my node from web transceiver
Is there an "issue" using the web transceiver on the same internet service/connection that the node is on? This is something I have wondered about but not ever tested.
Michael. VK5ZEA
On 24/09/2011 07:47, Peter Dahl wrote:
My node , 27595 appears to be fully operational now and ready to be deployed on the air finally except I have one burning question. I can control and access my node both locally and through the phone portal but not with the web transceiver. When I access most other nodes through the web transceiver I am immediately connected to them and the image of the keypad on the web page is active. When I access my node through the web transceiver the "keypad" stays inactive and the audible connection message does not play. What am I missing? Can someone please assist me with this final configuration of my node?
Thanks in advance!
Peter, WA7FUS, Node 27595 Brier, WA _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users