Thanks David, no need to go any further on this. Thanks for checking. Everything is working as it should. Danny K5CG ----- Original Message ----- From: "David McGough" <kb4fxc@inttek.net> To: "k5cg" <k5cg@hamoperator.org> Cc: "Users of Asterisk app_rpt" <app_rpt-users@lists.allstarlink.org> Sent: Tuesday, April 17, 2018 5:30:31 PM Subject: Re: [App_rpt-users] Link audio level Hi Danny, I tested the linkmongain setting and it does work as it was designed to. That command is named poorly, calling it linkmonduck would be a better name. linkmongain ONLY works for links in monitor mode, meaning that the connection was made using *2 (or *72 for permanent connections)...It does NOT work when *3 (or *73 for permanent connections) is the connection mode. Also note that linkmongain only changes the level of the monitored links when other normal local or link audio is also present. So, this acts similarly to telemetry ducking, where the telemetry level is changed by the telemduckgain parameter---when local (or other link audio) audio is present, only then does the linkmongain setting have any impact. There is no parameter (that I know of?) to independently adjust the audio level for incoming AllStar links. This is different from echolink (erxgain parameter), IRLP (irxgain parameter) and TLB (The link box) (trxgain parameter), where they can have their network audio levels changed....It is normally considered that AllStar links will all have their levels "normalized," so an independent setting for AllStar link gain levels should be unneeded. Does this make sense? If there is a need, for an AllStar link gain setting, I add this to the feature request list?? 73, David KB4FXC On Tue, 17 Apr 2018, David McGough wrote:
Hi Danny, I don't think I've ever tried the linkmongain setting. But, I don't think I've changed any of that code, either. I'll test and if it's broken, fix it, today. 73, David KB4FXC On Tue, 17 Apr 2018, K5CG wrote:
I'm trying to lower the audio level from the link to my RF repeater and I'm not seeing the linkmongain setting making a lick of difference.
I have tried -6, -10, -20 and now have...
linkmongain=-999
...in the node section below Audio level settings and above Dial Plan settings but there is no change. I wold expect this value to mute it completely on my transmitter audio.
http://docs.allstarlink.org/drupal/node/71
Asterisk 1.4.23-pre.hamvoip-V1.5.3-28- app_rpt-0.327 -04/05/2018 (should be OK, right?)
Linux allstar 4.4.44-1-ARCH #1 SMP Mon Jan 23 19:01:18 MST 2017 armv7l GNU/Linux
What have I done incorrectly?
Thanks
Danny K5CG
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.