[App_rpt-users] When will the nodesetup script work?

14 Jun 2016

      Just wanting to know when we will have the nodesetup script working again..

root@lorentedford:/etc/asterisk# nodesetup
*************************************
*     Simple Node Setup Script      *
*************************************

The system configuration type is the type of hardware and software
running on your system (simpleusb, channel_usb)

WARNING: Modifying the configuration type on an already set-up system
will over-write all existing configuration files!!!
If this is an initial installation, you have nothing to worry about.

Please make sure you understand these consequences if you
choose to change the system configuration type.

Would you like your config files be provided by the Allstar Portal server
[Y/n]? y

This requires you to have already applied for and received an approved
Allstar Link Portal user ID, set it up to be a system operator, created
an entry for, and properly configured information about this Server, and
requested, and received an approved Node entry for each of the Nodes on
this Server, and properly configured the inforation for each of the Nodes.

Have you estblished and entered the appropriate information on that server
[y/N]? y
*********************************************
*     Allstar Portal Node Setup Script      *
*********************************************

Do you wish to use the pre-configured user information (user kc9zhv) [Y/n]?
y

Please select one of the following servers

1)  KC9ZHV Repeater Site
2)  KC9ZHV 2 meter TX
3)  KC9ZHV-DataCenter-HUB
4)  kc9zhv 2m dc

Please make your selection (1-4): 4

Okay to download config for server kc9zhv 2m dc [Y/n]? y

Downloading server kc9zhv 2m dc...
Problem with Centos networking setup!
Allstar Link Portal Config Download Failed.. exiting
root@lorentedford:/etc/asterisk#

root@lorentedford:/etc/asterisk# cat /srv/post_install/nodesetup
# !/bin/bash
#
# nodesetup.sh
#
DRY_RUN=0
PCF_LOCAL=1
CONFIGS=/etc/asterisk
TMP=/tmp
SENABLE=1

function die {
        echo "Fatal error: $1"
        exit 255
}

function promptnum
{
        ANSWER=""
        while [ -z $ANSWER  ] || [[ ! $ANSWER =~ [0-9]{3,}$ ]]
        do
                echo -n "$1: "
                read ANSWER
        done
}

function promptcall
{
        ANSWER=""
        while [ -z $ANSWER  ] || [[ ! $ANSWER =~ [\/,0-9,a-z,A-Z]{3,}$ ]]
        do
                echo -n "$1: "
                read ANSWER
        done
}

function promptyn
{
        echo -n "$1 [y/N]? "
        read ANSWER
        if [ ! -z $ANSWER ]
        then
                if [ $ANSWER = Y ] || [ $ANSWER = y ]
                then
                        ANSWER=Y
                else
                        ANSWER=N
                fi
        else
                ANSWER=N
        fi
}

function promptny
{
        echo -n "$1 [Y/n]? "
        read ANSWER
        if [ ! -z $ANSWER ]
        then
                if [ $ANSWER = N ] || [ $ANSWER = n ]
                then
                        ANSWER=N
                else
                        ANSWER=Y
                fi
        else
                ANSWER=Y
        fi
}

echo "*************************************"
echo "*     Simple Node Setup Script      *"
echo "*************************************"
echo
echo "The system configuration type is the type of hardware and software"
echo "running on your system (simpleusb, channel_usb)"
echo
echo "WARNING: Modifying the configuration type on an already set-up system"
echo "will over-write all existing configuration files!!!"
echo "If this is an initial installation, you have nothing to worry about."
echo
echo "Please make sure you understand these consequences if you"
echo "choose to change the system configuration type."
echo

promptny "Would you like your config files be provided by the Allstar
Portal server"
if [ "$ANSWER" = "Y" ]
then
        echo
        echo "This requires you to have already applied for and received an
approved"
        echo "Allstar Link Portal user ID, set it up to be a system
operator, created"
        echo "an entry for, and properly configured information about this
Server, and"
        echo "requested, and received an approved Node entry for each of
the Nodes on"
        echo "this Server, and properly configured the inforation for each
of the Nodes."
        echo
        promptyn "Have you estblished and entered the appropriate
information on that server"
        if [ "$ANSWER" = "Y" ]
        then
                if [ -x /usr/bin/curl ] && [ -e
/etc/ssl/certs/ca-certificates.crt ]
                then
                        TMPF=/tmp/pcf.sh
                        /bin/rm $TMPF > /dev/null 2>&1
                        curl -L -s
https://allstarlink.org/config/portalconfig.sh -o $TMPF
                        if [ $? -ne 0 ]
                        then
                                echo "curl was not able to download
necessary script file, sorry."
                                exit 1
                        fi

                        if [ $PCF_LOCAL -eq 1 ]
                                then
                                        cp /usr/local/sbin/pcf.sh $TMPF
                        fi

                        bash $TMPF
                        if [ $? -ne 0 ]
                        then
                                rm $TMPF
                                echo "Allstar Link Portal Config Download
Failed.. exiting"
                                exit 1
                        fi
                        rm $TMPF
                        echo
                        echo "Congradulations! From now on, you will be
able to initiate an automatic"
                        echo "download of any Node or Server configuration
changes from the Allstar"
                        echo "Portal (just from the Web, without even
having to have any sort of terminal"
                        echo "session active to this system)."
                        echo
                        echo "You must now manually re-boot the system for
these changes to take place."
                        echo
                        echo "Thank you for using the Allstar Link Network
System!"
                        echo
                        exit 0
                else
                        echo "curl and its associated cert file(s) can not
be found, sorry!"
                        exit 1
                fi
        else
                echo "Nothing changed!"
                exit 0
        fi
fi

echo
echo "Doing sanity checks on rpt.conf, extensions.conf, iax.conf, and
savenode.conf..."

if [ -e $CONFIGS/extensions.conf ]
then
        grep -q -s 'NODE =' $CONFIGS/extensions.conf || die
"extensions.conf missing NODE=xxxx"
        NODE=$(grep 'NODE =' /etc/asterisk/extensions.conf | awk -F'= '
'{print $2}' | awk -F' ;' '{print $1}')
        NODE=$(echo $NODE | awk '{$1=$1}1')

else
        die "$CONFIGS/extensions.conf not found"
fi

if [ -e $CONFIGS/rpt.conf ]
then
        grep -q -s $NODE $CONFIGS/rpt.conf || die "Node numbers in rpt.conf
and extensions.conf are different!"
else
        die "$CONFIGS/rpt.conf not found"
fi

if [ -e $CONFIGS/iax.conf ]

then
        grep -q -s register\.allstarlink\.org $CONFIGS/iax.conf || die "No
allstar link register statement in iax.conf! (old file maybe?)"
        REG1=$(grep 'register =' $CONFIGS/iax.conf | awk -F'=' '{print $2}'
| awk -F'   ;' '{print $1}')
        REG=$(echo "$REG1" | awk -F'@' '{print $1}')

        REGNODE=$(echo "$REG" | awk -F':' '{print $1}')
        REGPSWD=$(echo "$REG" | awk -F':' '{print $2}')
        if [ $REGNODE != $NODE ]
        then
                die "Node numbers in rpt.conf and iax.conf are different!"
        fi
else
        die "$CONFIGS/iax.conf not found"
fi

if [ -e $CONFIGS/savenode.conf ]
then
        grep -q -s NODE= $CONFIGS/savenode.conf || die "savenode.conf
missing NODE=xxxx"
        grep -q -s PASSWORD= $CONFIGS/savenode.conf || die "savenode.conf
missing PASSWORD=xxxx"
        grep -q -s ENABLE= $CONFIGS/savenode.conf || die "savenode.conf
missing ENABLE=x"
        SNODE=$(grep NODE= $CONFIGS/savenode.conf | awk -F'=' '{print $2}')
        SPASSWORD=$(grep PASSWORD= $CONFIGS/savenode.conf | awk -F'='
'{print $2}')
        SENABLE=$(grep ENABLE= $CONFIGS/savenode.conf | awk -F'=' '{print
$2}')
        if [ $NODE != $SNODE ]
        then
                die "Node numbers in iax.conf and savenode.conf are
different!"
        fi
        if [ $REGPSWD != $SPASSWORD ]
        then
                die "Passwords in iax.conf and savenode.conf are different!"
        fi
        if [ -z $SENABLE ]
        then
                die "Enable not fully specified in savenode.conf!"
        fi
fi

echo "OK, the format of the files is understandable!"
echo

ANYNEW=0
NEWNODE=""
echo The system node number is: $NODE
promptyn "Would you like to change it?"
if [ "$ANSWER" = "Y" ]
then
        promptnum "Enter the new node number"
        NEWNODE=$ANSWER
        ANYNEW=1
fi

NEWPSWD=""
echo The registration password is: $REGPSWD
promptyn "Would you like to change it?"
if [ "$ANSWER" = "Y" ]
then
        promptnum "Enter the new registration password"
        NEWPSWD=$ANSWER
        ANYNEW=1
fi

ID=""
promptyn "Would you like to enter a callsign for the identifier"
if [ "$ANSWER" = "Y" ]
then
        promptcall "Please enter your callsign"
        ID=$ANSWER
        ANYNEW=1
fi

if [ $SAVENODE_ENABLE -ne $SENABLE ]
then
        ANYNEW=1
fi

if  [ $ANYNEW -gt 0 ]
then
        echo "Copying original files to temporary work area..."
        cp $CONFIGS/rpt.conf $TMP/rpt.conf.in || die "Could not copy
$CONFIGS/rpt.conf"
        cp $CONFIGS/extensions.conf $TMP/extensions.conf.in || die "Could
not copy $CONFIGS/extensions.conf"
        cp $CONFIGS/iax.conf $TMP/iax.conf.in || die "Could not copy
$CONFIGS/iax.conf"
        if [ -e $CONFIGS/savenode.conf ]
        then
                cp $CONFIGS/savenode.conf $TMP/savenode.in || die "Could
not copy $CONFIGS/savenode.conf"
        fi
else
        echo "Nothing to do!"
        exit 0
fi

if [ ! -z $ID ]
then
        echo "Updating rpt.conf with new ID..."
        sed "s~idrecording[ \t]*=[ \t]*|.*~idrecording = |i$ID\t\t\t; Main
ID message~" <$TMP/rpt.conf.in >$TMP/rpt.conf.out
        mv -f $TMP/rpt.conf.out $TMP/rpt.conf.in || die "mv 1 failed"
        sed "s~idtalkover[ \t]*=[ \t]*|.*~idtalkover = |i$ID\t\t\t;
Talkover ID message~" <$TMP/rpt.conf.in >$TMP/rpt.conf.out
        mv -f $TMP/rpt.conf.out $TMP/rpt.conf.in || die "mv 1 failed"
fi

if [ ! -z $NEWNODE ]
then
        echo "Updating rpt.conf iax.conf, and extensions.conf with new node
number..."
        sed "s/$NODE/$NEWNODE/g" <$TMP/extensions.conf.in
...
$TMP/extensions.conf.out
        mv -f $TMP/extensions.conf.out $TMP/extensions.conf.in || die "mv 2
failed"
sed "s/$NODE/$NEWNODE/g" <$TMP/rpt.conf.in >$TMP/rpt.conf.out
        mv -f $TMP/rpt.conf.out $TMP/rpt.conf.in || die "mv 3 failed"

        sed "s/$NODE/$NEWNODE/g" <$TMP/iax.conf.in >$TMP/iax.conf.out
        mv -f $TMP/iax.conf.out $TMP/iax.conf.in || die "mv 4 failed"

        if [ -e $CONFIGS/savenode.conf ]
        then
                sed "s/$NODE/$NEWNODE/g" <$TMP/savenode.in
...
$TMP/savenode.out
                mv -f $TMP/savenode.out $TMP/savenode.in || die "mv 5
failed"
        fi
fi
if [ ! -z $NEWPSWD ]
then
        echo "Updating allstar link register statement in iax.conf with new
password..."
        sed "s/$REGPSWD/$NEWPSWD/g" <$TMP/iax.conf.in >$TMP/iax.conf.out
        mv -f $TMP/iax.conf.out $TMP/iax.conf.in || die "mv 6 failed"

        if  [ -e $CONFIGS/savenode.conf ]
        then
                sed "s/$REGPSWD/$NEWPSWD/g" <$TMP/savenode.in
...
$TMP/savenode.out
                mv -f $TMP/savenode.out $TMP/savenode.in || die "mv 7
failed"
        fi
fi
if  [ -e $CONFIGS/savenode.conf ]
then
        sed "s/ENABLE=$SENABLE/ENABLE=$SAVENODE_ENABLE/g" <$TMP/savenode.in
...
$TMP/savenode.out
        mv -f $TMP/savenode.out $TMP/savenode.in || die "mv 7 failed"
fi
if [ $DRY_RUN -eq 0 ]
then
        sed -i 's/; register =/register =/g' $TMP/iax.conf.in

        # Used the $ in place of the /
        sed -i 's$;statpost_program = /usr/bin/wget$statpost_program =
/usr/bin/wget$g' $TMP/rpt.conf.in
        sed -i "0,/statpost_url/ s/;statpost_url /statpost_url/" $TMP/
rpt.conf.in

        echo "Updating original config files..."
        mv -f $TMP/rpt.conf.in $CONFIGS/rpt.conf || die "mv 8 failed"
        mv -f $TMP/extensions.conf.in $CONFIGS/extensions.conf || die "mv 9
failed"
        mv -f $TMP/iax.conf.in $CONFIGS/iax.conf || die "mv 10 failed"
        if  [ -e $CONFIGS/savenode.conf ]
        then
                mv -f $TMP/savenode.in $CONFIGS/savenode.conf || die "mv 11
failed"
                chmod +x $CONFIGS/savenode.conf || die "chmod failed!"
        fi
        echo "Config files updated. Done!!"
        echo
else
        echo "Dry run"
        echo
fi
exit 0

Loren Tedford (KC9ZHV)
Email: lorentedford@gmail.com
http://www.lorentedford.com
http://www.kc9zhv.com
http://forum.kc9zhv.com
http://hub.kc9zhv.com
http://www.newwavesucks.com
http://forum.newwavesucks.com