Put another Allstar node on your computer and tie echolink to it rather than your repeater node. Then you can connect or disconnect echolink from your repeater node at will. -- Tim :wq On Nov 21, 2013, at 5:57 PM, Chuck Henderson <rpt2@chuck.midlandsnetworking.com> wrote:
In rpt.conf you can add something like this example to your [functionsXXXXX] and then use these to disable or enable incoming connection.
949=cop,49 ; Disable incoming connections (control state noice) 950=cop,50 ; Enable incoming connections (control state noicd)
Chuck
On Thu, Nov 21, 2013 at 6:54 PM, Bradley Haney <hammin75@gmail.com> wrote: What command can I use to kill all remote incoming connections including echolink.... we had a tornado up jere and using the repeater during that for storm watch was hard as echolink users kept connecting and disconnecting
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users