Skyler, Channel steering should give you 15 channels using 4 pins for steering. I know the CDM and the GM300's work this way. On Wed, Apr 13, 2016 at 10:00 AM, <app_rpt-users-request@ohnosec.org> wrote:
Send App_rpt-users mailing list submissions to app_rpt-users@ohnosec.org
To subscribe or unsubscribe via the World Wide Web, visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users or, via email, send a message with subject or body 'help' to app_rpt-users-request@ohnosec.org
You can reach the person managing the list at app_rpt-users-owner@ohnosec.org
When replying, please edit your Subject line so it is more specific than "Re: Contents of App_rpt-users digest..."
Today's Topics:
1. Reset to channel 1 on radius (Skyler F)
----------------------------------------------------------------------
Message: 1 Date: Tue, 12 Apr 2016 22:30:23 -0600 From: Skyler F <electricity440@gmail.com> To: "app_rpt-users@ohnosec.org" <app_rpt-users@ohnosec.org> Subject: [App_rpt-users] Reset to channel 1 on radius Message-ID: <CAJNyT08s-8MODP= r2gVFykAJ8F9NFycWd9OmrgpYnLensR6-gQ@mail.gmail.com> Content-Type: text/plain; charset="utf-8"
AllStar Remote base wise, I am using some radius radios (m216 for VHF, SM120 UHF). The VHF one does have Channel steer option on the software, but I don't get to use every channel that the radio has :( only 8 instead of 16. With the amount of repeaters here in Denver , I need as many channels as I can get!
I can easily simulate key presses, but I would like a reliable way to reset the channel back to original state. These radius radios remember the channel they were on after a power cycle (unfortunately, in my case). Is there any way to force it to go back to channel one?
73, Skyler KD?WHB