I'm sorry O.M. your message is not clear but I'll try from what I see. First, there is a duplex= setting in both rpt.conf and usbradio.conf I was not sure you have been changing the correct one. It's happened before.... Assuming a full duplex simple repeater, duplex=1 in usbradio.conf... see http://ohnosec.org/drupal/node/193 duplex=2 in rpt.conf... see http://ohnosec.org/drupal/node/84 If there is some other issue, it could be in other timers/settings if you are using the correct duplex for your need. But sometimes a simple remove and replace the usb sound dongle may clean it out if you have been adjusting settings very much. If not resolved, try a hard boot and test before adjusting settings again. ...mike/kb8jnm
Hi all, in duplex=2 i can hear myself for just a sec when i unkey. Is the correct was to solve this is to change to duplex=3 and wire the rx radio audio out/cod to the tx radio audio in/ptt?
hardware = kenwood tx radio, kenwood rx radio, asterisk on pi2, uri, duplexer.
wiring PDF here
w6fbw.digitalattack.org/wiring.pdf
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.