Hi all, I need a voting repeater with one master site (duplex repeater) and one voting receiver. Both sites based on RTCMs. And server is a separate PC hasnt any physical connection to radio. Question: I need a 2 GPS receivers for RTCMs or I need 3 GPS (one for server) ? Thanks! Regards Mihhail Jakovlev From: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of Michael Hebert Sent: Sunday, April 20, 2014 7:42 AM To: Tim Sawyer Cc: app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] RTCM voting setup GTX goes to TX Data On Sat, Apr 19, 2014 at 11:39 PM, Tim Sawyer <tim.sawyer@mac.com<mailto:tim.sawyer@mac.com>> wrote: I think that’s the problem. Reverse them. -- Tim :wq On Apr 19, 2014, at 8:55 PM, Mark Johnston <markjohnston73@gmail.com<mailto:markjohnston73@gmail.com>> wrote: assuming GTX is transmit that goes to the GPS rx line and vice versa _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org<mailto:App_rpt-users@ohnosec.org> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.