Doesn't ASL send PL till the end of the tail? Thanks, Bob K6ECM Sent from iPad
On Aug 19, 2018, at 7:08 AM, Mike <mm@midnighteng.com> wrote:
There are many methods for doing this. The one I prefer is to use ctcss on link radios and use the tone for COS So if you can 'pass' pl on the system OR generate a pl only when the repeater has a active cos, works. You can't listen to the repeater 'tail' on your cos. It's the same mistake most make when doing radio remote echolink set-ups.
...mike/kb8jnm
On 8/19/2018 12:53 AM, Bob Pyke wrote: The local club wants to link two repeaters (local and remote) using a 440 link. I’d like to see just how serious folks are about this before we go to all that expense. I’m looking for some pointers as I attempt to setup a “chicken link” with our remote repeater using a local radio attached to an Allstarlink node. The radio operates in half-duplex with the receive audio out over the internet, and the audio coming in from the internet is transmitted to the remote repeater. My first attempt resulted in ping ponging between the repeater and my local radio. I’m certainly missing something. I’m looking for some added insights. I started by using duplex=0 in rpt.conf Thanks, Bob K6ECM Sent from iPad _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.