APSTAR,TCPIP*,qAC,CORE-2:;WB9UUS-12*140608z4030.38N708859.28WAAsterisk app_rpt user 2012-06-04 14:38:05 UTC: *WB9UUS-R<http://aprs.fi/?c=raw&limit=&call=WB9UUS-R>
APSTAR,TCPIP*,qAC,CORE-2:;N9DOA-12*143805z4030.28N908859.28WAAsterisk app_rpt user *[Invalid object]* 2012-06-04 15:00:22 UTC: *WB9UUS-R<http://aprs.fi/?c=raw&limit=&call=WB9UUS-R>
APSTAR,TCPIP*,qAC,CORE-2:;WB9UUS-12*150021z4030.38N908859.28WAAsterisk app_rpt user 2012-06-04 15:13:33 UTC: *WB9UUS-R<http://aprs.fi/?c=raw&limit=&call=WB9UUS-R>
APSTAR,TCPIP*,qAC,CORE-2:;N9DOA-12*151333z4030.28N708859.28WAAsterisk app_rpt user *[Invalid object]* 2012-06-04 15:52:32 UTC: *WB9UUS-R<http://aprs.fi/?c=raw&limit=&call=WB9UUS-R>
APRSTT on my systems works for some call signs but not for some others. Here is an example from the aprs.fi raw log. Can anyone shed some light on why N9DOA shows up as "*[Invalid object]*"? Is it a problem with aprs.fi or with the code in app_rpt, or with the way I setup rpt.conf? Chuck 2012-06-04 14:05:58 UTC: *WB9UUS-R<http://aprs.fi/?c=raw&limit=&call=WB9UUS-R> *>APRS,TCPIP*,qAC,CORE-2:=4030.48N/08859.28WrPHG9580/AllStar Node 27468 2012-06-04 14:06:08 UTC: *WB9UUS-R<http://aprs.fi/?c=raw&limit=&call=WB9UUS-R> * * * * *
APSTAR,TCPIP*,qAC,CORE-2:;WB9UWA-12*155231z4030.18N708859.28WAAsterisk app_rpt user 2012-06-04 15:52:39 UTC: *WB9UUS-R<http://aprs.fi/?c=raw&limit=&call=WB9UUS-R> *>APRS,TCPIP*,qAC,CORE-2:=4030.48N/08859.28WrPHG9580/AllStar Node 27468
On Thu, May 3, 2012 at 8:09 PM, Bradley Haney <kc9gqr@gmail.com> wrote:
To get aprs TT working on ALLSTARLINK down load the latest from the SVN.
Upgrading Asterisk to latest (SVN) version
If you are using a brand-new current version of ACID or Limey Linux (that was released after the implementation of this new Portal) you are already upgraded sufficiently. If not ...
Asterisk must be upgraded to the latest SVN version.
For the ACID distribution (and other Linux platforms): cd /usr/src rm -rf astsrc wget http://x.allstarlink.org/svn-trunk.tar.gz -O- | tar xzv mv trunk astsrc cd astsrc make upgrade-acid
Then go into the rpt.conf file and add APRSTT=
some where in that file. I made it the first line in that config file right underneath the node number
Then just google APRS TT and there is a link on Bob's aprs site on everything about APRSTT..
Then to get it to only beacon every 10 min's i added interval=600 into the gps.conf file.
73's
Bradley _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users