Yes, and this works if everything is USBRADIO. But remember, one is USBRADIO and one is SIMPLEUSB. Ah, now the fun begins. N5ZUA On 5/21/2016 5:13 PM, David McGough wrote:
For any of the AllStar releases:
Launch Asterisk from the command prompt.
asterisk> radio active usb asterisk> radio tune save
If two URI's are attached, perform:
asterisk> radio active usb1 asterisk> radio tune save
If three URI's are attached, perform:
asterisk> radio active usb2 asterisk> radio tune save
...Then, the usbradio_tune_xxx.conf file(s) will be pre-configured with what the AllStar software interprets the various devstr parameters to be.
asterisk> exit
On Sat, 21 May 2016, Steve Agee wrote:
Thanks, but as previously mentioned, this is DIAL and so your CLI commands from XIPAR do not exist.
N5ZUA
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.