That not true works great, have two in the field at repeater sites. https://www.dropbox.com/s/05mdzjuqz87xi78/20180626_100527.jpg?dl=0 -------- Original message --------From: Sean McCarthy <smccarthy61@gmail.com> Date: 8/4/18 12:00 PM (GMT-06:00) To: Users of Asterisk app_rpt <app_rpt-users@lists.allstarlink.org> Subject: Re: [App_rpt-users] UPS for a PI 3 B+ I read that this board will not recharge the batteries without physical intervention, i.e. pressing the switch, after a power failure. this would make if fine unless you want unattended operation. On Sat, Aug 4, 2018 at 8:24 AM, David <david@kg5rdf.com> wrote: This one works: https://www.amazon.com/dp/B01MQYX4UX?ref=yo_pop_ma_swf -------- Original message --------From: Ramesh Dhami <Ramesh@va3uv.com> Date: 8/4/18 7:03 AM (GMT-06:00) To: app_rpt-users@lists.allstarlink.org Subject: [App_rpt-users] UPS for a PI 3 B+ Hi All: This topic comes up from time-to-time! Does anyone have experience with the following UPS HAT: http://www.pimodulescart.com/shop/item.aspx?itemid=50 The ordering options seems to be a little confusing! Additionally, what I am looking for is: 1. Does this fully restore power once the battery has been discharged and the AC power is restored? - i.e., no buttons to press (my application is in an unattended / remote location) 2. Is this the s/w that I need to install: https://github.com/modmypi/PiModules/wiki/UPS-PIco-Installation -> Any incompatibility / will it break a DIAL install? Thanks, Ramesh. VA3UV / KN4RSD #27919 (and others!) _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.