Hey David, Thanks for your response. I tried this: *06 = 53.720,136.5,1000,h-t* When I call it up, it still splits to 0.5 mhz (53.220). Made sure I rebooted the node as well. So for grins I tried this: *06 = 53.720,136.5,2000,h-t * Still it transmits at 53.220 instead of 52.720. Monty On Wed, Dec 7, 2011 at 9:26 AM, David KE6UPI <dshaw@ke6upi.com> wrote:
Check out this webpage.
http://ohnosec.org/drupal/node/175
You may also specify the offset in a memory channel by adding an additional parameter before the options, for example:
01 = 147.435,103.5,1035,h-t ; This would be for W6NUT in Los Angeles with input of 146.40
David
On Sun, Dec 4, 2011 at 2:37 PM, Monty <monty@ke7jvx.com> wrote:
Hello Everyone, I have successfully integrated a Low Band Syntor X with an Xcat to app_rpt using CI-V. I have a problem though. There are currently 6 6m repeaters here in Arizona, 3 have 0.5 mhz split and the other 3 have 1 mhz splits. I have only been successful in programing the 0.5 split frequencies in App_Rpt memories. Is there a trick to make it split to 1 mhz or is that not possible?
Monty
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users