Apparently my post didn't go, so here is again. OK I took Tom’s advice and read the previous threads, and put in a P instead of an X and also put in NODE = 29600 under the global standard. I don’t know which worked, but the problem is solved. Thanks Everyone. -----Original Message----- From: Tom Hayward [mailto:tom@tomh.us] Sent: Friday, July 29, 2016 1:16 PM To: John Griffith <jcarl.griffith@gmail.com> Cc: APP RPT <App_rpt-users@ohnosec.org> Subject: Re: [App_rpt-users] IAXRPT issue on Android On Fri, Jul 29, 2016 at 12:41 PM, John Griffith <jcarl.griffith@gmail.com> wrote:
Anyone here experiencing the network keying up when IAXRPT is started?
Apparently you have to touch PTT and touch again on the Android before it will release, then it works fine.
The Admins of the repeater system I connected to had to disable my node because I didn’t know it was keying up all the repeaters, and I didn’t know it.
Yes, we discussed it last week: http://ohnosec.org/pipermail/app_rpt-users/2016-July/014622.html The solution was to change the Rpt command to P mode. This differs from the X mode which works for IAXRPT for Windows. http://ohnosec.org/pipermail/app_rpt-users/2016-July/014628.html Tom KD7LXL