On Aug 7, 2013, at 12:36 PM, Monty <monty@ke7jvx.com> wrote:
I had some weird noises coming from a node I installed on VMplayer on my windows 7 machine aswell. In speaking with a few VM gurus they believed it was the time slicing VMplayer does that was causing it, and I was trying to use a URI. Now, your mileage may very, but I have a HUB node and a URIx connected to my Proxmox server and both work flawless. I did not do any custom modification to the install, but I did have to map the USB device to my Allstar VM through Proxmox.
Monty
On Wed, Aug 7, 2013 at 7:07 AM, Tim Sawyer <tim.sawyer@me.com> wrote: Have you ever updated the source? https://allstarlink.org/support.html#astupgrade If not give it a try. -- Tim :wq
On Aug 6, 2013, at 11:11 PM, David and Rhianne Osborn <david.osborn@manx.net> wrote:
I omitted to clarify that this test was VMWare player and, to be honest, it does appear to sound and work OK, but I’ll heed the advice that it may misbehave.
If anyone could indulge my curiosity, though, where are these 6 beeps coming from? I disabled all CTs and also copied the rpt.conf from node 2483, which has run as a hub for a couple of years, and yet it still bleeps at me! If it’s relevant, the test hub has a private node address and doesn’t register with AllStar.
So, where’s the “beepy” bit? What’s it telling me?
Ta loads.
David
From: Jim W7RY [mailto:w7ry@centurytel.net] Sent: 07 August 2013 05:26 To: Tim Sawyer; David Osborn Cc: app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] Bleeping Hub
A node on VM Player works perfectly on a Windows 7 laptop. I have a node running on this Windows laptop.
Why doesn't it work in VMWare?
73 Jim W7RY
From: Tim Sawyer Sent: Tuesday, August 06, 2013 2:10 PM To: David Osborn Cc: app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] Bleeping Hub
Running asterisk on a VM is a no, no... it's not supported... it doesn't work... forget it... -- Tim :wq
On Aug 6, 2013, at 12:30 PM, David Osborn <david.osborn@manx.net> wrote:
Hey gang,
Just goofing around, I wanted to see how well Allstar would play when configured as a hub node under VMWare.
Well, it worked and I was able to make connections to other nodes, connect with IaxRPT and all that good stuff. The thing is, it likes to beep.
When I connect the virtual hub to another node and then key that node, when I let go the button I get 6 rapid beeps followed by the courtesy beep from the node I’m accessing.
I believe that these beeps are coming from the V-Hub, but can’t figure out why.
Anyone got any ideas on this one?
Thanks
David – GD4HOZ
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users