Robert, To answer your question. No, the Rigblaster Nomic can NOT be used with Allstarlink. Allstarlink uses usb sound channel drivers, these channel drivers only support very specific chip sets. Off the top of my head they are the following there may be more. CM108 CM119A and the CM119B 73 Marshall - ke6pcv -----Original Message----- From: App_rpt-users [mailto:app_rpt-users-bounces@lists.allstarlink.org] On Behalf Of Robert Hanssen Sent: Monday, March 04, 2019 12:34 PM To: app_rpt-users@lists.allstarlink.org Subject: [App_rpt-users] Rigblaster (Repost) Re-posting of my message to the group which was accidentally formatted using HTML, my apologies. Greetings to the group, I've extensively reviewed the Allstar Link documentation but can't find a definitive answer to my question. Can Allstar be used with an interface such as the Rigblaster Nomic (PTT) in conjunction with an built in PC soundcard? Here is a link to the interface I am referring to: http://www.westmountainradio.com/pdf/nomicman4.pdf Any information is greatly appreciated. Thanks to the group for all the informative technical information provided on the list. Regards, R. Hanssen