Wow, forget I even sent that last email... LONG DAY! Corey N3FE From: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of Corey Dean Sent: Friday, July 20, 2012 4:11 PM To: Ryan Collier; app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] Simpleusb problem.... What is in your usbradio.conf file. You showed the tune file, but not the usbradio.conf file. Corey N3FE From: app_rpt-users-bounces@ohnosec.org<mailto:app_rpt-users-bounces@ohnosec.org> [mailto:app_rpt-users-bounces@ohnosec.org]<mailto:[mailto:app_rpt-users-bounces@ohnosec.org]> On Behalf Of Ryan Collier Sent: Friday, July 20, 2012 12:41 AM To: app_rpt-users@ohnosec.org<mailto:app_rpt-users@ohnosec.org> Subject: [App_rpt-users] Simpleusb problem.... Greetings, A few guys have been trying to help me but thought I would post to see if I get something different. No one can answer this problem. I can not adjust the setting on my fob with simpleusb-tune-menu here is simpleusb.conf [usb27539] hdwtype=0 rxboost=0 txboost=0 carrierfrom=usbinvert ctcssfrom=no txmixa=no txmixb=no invertptt=0 duplex=1 rxondelay=0 eeprom=0 here is simpleusb_tune_usb27539.conf [usb27539] ; name=usb27539 ; devicenum=1 devstr=4-2 rxmixerset=200 txmixaset=0 txmixbset=0 notice everything on the tx side is set to 0. I still get audio. If I put it on 999 it still sounds the same. I can also try and change the rx audio and it does move either. If I change to usbradio, it is opposite. I can not get any audio to go in or out. But cos and ptt works. Any ideas? Ryan -- This message was scanned and is believed to be clean. Click here to report this message as spam.<%0d%0ahttp:/simba.repeater.net:8080/cgi-bin/learn-msg.cgi?id=174C7221C.A8AA4%0d%0a> -- This message was scanned and is believed to be clean. Click here to report this message as spam.<%0d%0ahttp:/simba.repeater.net:8080/cgi-bin/learn-msg.cgi?id=80928221C.ABDDA%0d%0a>