sounds to me you are using a simplex node. In your simpleusb.conf or usbradio.conf, ensure duplex=0, and not duplex=1. This is different from duplex= in rpt.conf I had the same symptoms when I first setup my node. Also, make sure you use the radio-tune-menu with a service monitor or some other methods to make sure your have good, clean audio being transmitted over the internet and over your node radio. ~Benjamin, KB9LFZ On Wed, 2013-07-03 at 13:58 -0600, Joshua Hintze wrote:
Hello,
It is my first posting on here. I have ALMOST gotten the ACID installation working. I'm using the URI interfaced to ACID and to my radio. The asterisk can properly key the radio and its working just fine with that. I can also connect to the node with iaxRpt directly with no problem and transmit OUT of my radio.
However I am having some issues when my radio receives communication in that as soon as I get my first radio RX, asterisk will then play a tone out of the URI into the radio over and over again at about a one second interval. In the asterisk terminal it just keeps repeating:
-- Hungup 'Zap/pseudo-1726358622'
-- Hungup 'Zap/pseudo-1774817359'
-- Hungup 'Zap/pseudo-691532115'
-- Hungup 'Zap/pseudo-81389311'
-- Hungup 'Zap/pseudo-465154784'
-- Hungup 'Zap/pseudo-627058532'
-- Hungup 'Zap/pseudo-1656870264'
-- Hungup 'Zap/pseudo-1671691803'
-- Hungup 'Zap/pseudo-50274194'
forever keeping my radio always keyed.
I have the COR from the radio going into the URI. I do not plan on using CTCSS and have tried tying it to ground as well as tying it to the COR as well. My usbradio.conf has the following:
carrierfrom=usb
ctcssfrom=no
I have tried also ctcssfrom=usb as well.
Any help would be appreciated.
Thanks,
Josh
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users