More info...I am getting data sent out the serial port,the radio is just choosing to ignore it. Gary __________________________________________ Gary Young Telecommunication Engineering Associates Tel: 650.590.1802 Fax: 650.590.1872 Gary wrote:
I now have the FT897 responding to about half of the remote commands. Here is a list of what commands it seems to just ignore:
remote,6 Set mode remote,101 Rx PL on remote,4 Set rx PL tone remote,100 Rx PL off remote,103 Tx PL on remote,3 Set tx PL tone remote,102 Tx PL off remote,104 Low Power remote,105 Medium Power remote,106 High Power
Any idea why only these?
Gary __________________________________________ Gary Young Telecommunication Engineering Associates Tel: 650.590.1802 Fax: 650.590.1872
Steve Rodgers wrote:
[1234] functions=functions-remode ; Auth level for remote base nodes ;0 = logins disabled (default) ;1 = require login, but do not prompt, ;2=require login and prompt authlevel = 1
[functions-remote] ; ; User passwords for use with authlevel > 1. ; Define one function for each user so each user has a separate access code. ; Passwords are variable in length and can be as long or as short as desired. ; Each password takes four arguments: the 'remote' keyword, the method (99), ; the announce callsign, and a license class designator. Note that the license ; class designator ignored at this time by app_rpt, but future versions will ; limit license classes to appropriate HF subbands. ; ; Users must log in within a time out period, or the remote base will ; automatically disconnect. Once a user successully logs in, the callsign ; of the user will be announced. (You will need to add the additional ; sound files to support the voice prompts if you are upgrading an ; existing installation). ; 845678=remote,99,WB6NIL,G 88765=remote,99,WA6ZFT,E
On Thursday 16 November 2006 07:59, Gary wrote:
Please send a sample authlevel setup as I have not found any info on how to set it up in the rpt.conf file.
I am using a Yaesu CT-62 level converter.
Do I need to set the CPU serial port speed/bits etc in Linux first?
I can look at the serial data tonight and try the default command settings.
Gary
Steve Rodgers wrote:
Gary,
The login function can be used to get unauthorized users from accessing a remote base. If the authlevel is a 1 or 2 in the node config block, it will prevent the remote base from being used until a password is entered. The default authlevel is 0 (off). You may have several login entries defined to allow each user to have their own password. At some point we may also allow logins to be limited to HF subbands by license class.
Regarding the issues with your FT897 setup:
Do you have anything you can hook up to the serial port and grab what is being sent to the radio? We'd like to know if what is being sent is correct, and verify the baud rate is set correctly.
Have you tried using the default command settings? Do they act any differently?
One other question, what are to using to shift the levels from RS-232 to TTL?
Steve,
WA6ZFT
On Wednesday 15 November 2006 23:54, Gary wrote:
My FT897 is not reacting properly to the remote commands. Scan and step sort of work, nothing else. A mode change locks the front panel.
I have the CAT Baud rate set to 9600.
What am I missing here?
What is the "user login" function for?
Here is my config.
[1022] rxchannel = Zap/1 remote=ft897 functions = functions-remote phone_functions = functions-remote ioport = /dev/ttyS0
[functions-remote] 11=remote,2 ; Set freq. 12=remote,119 ; Tune 13=remote,6 ; Set mode
21=remote,101 ; Rx PL on 22=remote,4 ; Set rx PL tone 23=remote,100 ; Rx PL off 24=remote,103 ; Tx PL on 25=remote,3 ; Set tx PL tone 26=remote,102 ; Tx PL off
31=remote,104 ; Low Power 32=remote,105 ; Medium Power 33=remote,106 ; High Power
41=remote,110 ; Bump +20 42=remote,111 ; Bump +100 43=remote,112 ; Bump +500 44=remote,107 ; Bump -20 45=remote,108 ; Bump -100 46=remote,109 ; Bump -500
71=remote,116 ; Scan + slow 72=remote,117 ; Scan + quick 73=remote,118 ; Scan + fast 74=remote,113 ; Scan - slow 75=remote,114 ; Scan - quick 76=remote,115 ; Scan - fast
61=remote,5 ; Long status query 60=remote,140 ; Short status query
99=remote,99 ; User login
0=cop,6 ; Phone PTT
Gary _______________________________________________ App_rpt mailing list App_rpt@lists.illiana.net http://lists.illiana.net/mailman/listinfo/app_rpt
App_rpt mailing list App_rpt@lists.illiana.net http://lists.illiana.net/mailman/listinfo/app_rpt
App_rpt mailing list App_rpt@lists.illiana.net http://lists.illiana.net/mailman/listinfo/app_rpt
App_rpt mailing list App_rpt@lists.illiana.net http://lists.illiana.net/mailman/listinfo/app_rpt