Yeah, I can wait and see what develops. It's not the end of the world; it's just getting the online status is better manners than subjecting everyone (who isn't on a repeater with unnecessary Alison jabbering turned off) having to hear 30 repeater connections listed over the air... Bob/KK6RQ On Sun, Jan 11, 2015 at 8:28 PM, <mike@midnighteng.com> wrote:
You could be having some problems with internet host (especially if it is comcast). Probably temporary, don't go changing your settings over it just yet. Give it a few days and reboots (computer and router) to see how it pans out.
...mike/kb8jnm
-------- Original Message -------- Subject: Re: [App_rpt-users] Node Status not showing... From: Jah Rastafari <nuhtrue@gmail.com> Date: Sun, January 11, 2015 9:20 pm To: mike@midnighteng.com, "app_rpt-users@ohnosec.org" <app_rpt-users@ohnosec.org>
I went back right after reading your reply (several hours after my original post) and it in fact came up the way it should. But then 5 minutes later it went back to saying I wasn't connected. I'm not sure what it means but I can say I've never seen it behave like this before.
On Sun, Jan 11, 2015 at 4:56 PM, <mike@midnighteng.com> wrote:
Not sure but....
I think you are only suffering from a delay of the update to the list.
Try waiting for a short while (up to 30min) and look again. Others have said it takes that long sometimes but I have only witnessed about 5-6min.
Guess it depends on how busy the server is.
...mike/kb8jnm
-------- Original Message -------- Subject: [App_rpt-users] Node Status not showing... From: Jah Rastafari <nuhtrue@gmail.com> Date: Sun, January 11, 2015 5:29 pm To: "app_rpt-users@ohnosec.org" <app_rpt-users@ohnosec.org>
Forgive me if this has already been discussed and I missed it, but I
just
noticed recently that although I was connected to a number of other nodes/repeaters, the 'Node Status' selection on the Allstar site says I'm not connected to anything. My node(s) show up properly in the available node list and everything else is as it should be. The Web Transceiver works properly also and I haven't changed anything recently. Am I missing something?
Bob/ KK6RQ<hr>_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.