See update below
On Feb 23, 2016, at 4:07 PM, kk6ecm <kk6ecm@gmail.com> wrote:
Issue with simpleusb on the Pi2. I implemented USB radio, and the problem went away. Modify modules,conf (no load simple, and load usbradio, and add usbradio.conf and usbradio_ tune_<node Numbers>.conf. Update rpt.conf. Recommend tuning per instructions.
May have missed something.
Thanks, Bob kk6ecm 73
Sent from iPad
On Feb 23, 2016, at 3:56 PM, gregory <dropbox@digitalattack.org> wrote:
Hi all, in duplex=2 i can hear myself for just a sec when i unkey. Is the correct was to solve this is to change to duplex=3 and wire the rx radio audio out/cod to the tx radio audio in/ptt?
hardware = kenwood tx radio, kenwood rx radio, asterisk on pi2, uri, duplexer.
wiring PDF here
w6fbw.digitalattack.org/wiring.pdf
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.