Re: [App_rpt-users] Node Status not showing...

12 Jan 2015

      There is a problem with the status server and I am sure the powers to be will look into it. Until then you can live without it. 

Also I have mentioned this before. If you don't want to hear constant connect/disconnect messages set the following two parameters in your node stanza in rpt.conf

holdofftelem=1
telemdefault=2

This will announce connect/disconnect messages YOU make but them will mute others after about 30 seconds. This is a good compromise giving you feedback of what you do but not others. This is the default setting in the BBB code.

73 Doug
WA3DSP
http://www.crompton.com/hamradio

Date: Mon, 12 Jan 2015 15:47:17 -0600
From: nuhtrue@gmail.com
To: w7ldn@w7ldn.com; app_rpt-users@ohnosec.org
Subject: Re: [App_rpt-users] Node Status not showing...

Sort of; I'm referring to the malfunction of the online/visual alternative to querying which nodes one is connected to because the Alison verbal readout pisses a lot of people off if you're connected to more than a couple.

Oh and btw the account was originally setup with the tongue-in-cheek  name Jah Rastafari to order reggae records. I often forget it's even there.

-Bob/KK6RQ

On Mon, Jan 12, 2015 at 3:10 PM, Elden Fenison <w7ldn@w7ldn.com> wrote:
Not sure if your name is Jah, or Bob. But at any rate, I recently setup my first simplex allstar node and managed to hit the wrong command sequence and triggered a long train of announcements listing all the connected nodes. You mean to say that I'm not the only one who heard that? Most embarrassing. It eventually stopped abruptly and I did find myself disconnected. Hmm...

On Sun Jan 11 2015 at 8:26:09 PM Jah Rastafari <nuhtrue@gmail.com> wrote:
Yeah, I can wait and see what develops. It's not the end of the world; it's just getting the online status is better manners than subjecting
everyone (who isn't on a repeater with unnecessary Alison jabbering turned off) having to hear 30 repeater connections listed over the air...

Bob/KK6RQ

On Sun, Jan 11, 2015 at 8:28 PM,  <mike@midnighteng.com> wrote:

You could be having some problems with internet host (especially if it

is comcast).

Probably temporary, don't go changing your settings over it just yet.

Give it a few days and reboots (computer and router) to see how it pans

out.

...mike/kb8jnm
...
-------- Original Message --------
...
Subject: Re: [App_rpt-users] Node Status not showing...
...
From: Jah Rastafari <nuhtrue@gmail.com>
...
Date: Sun, January 11, 2015 9:20 pm
...
To: mike@midnighteng.com,  "app_rpt-users@ohnosec.org"
...
<app_rpt-users@ohnosec.org>
...

...

...
I went back right after reading your reply (several hours after my original
...
post) and it in fact came up the way it should. But then 5 minutes
...
later it went back to saying I wasn't connected. I'm not sure what it means
...
but I can say I've never seen it behave like this before.
...

...
On Sun, Jan 11, 2015 at 4:56 PM, <mike@midnighteng.com> wrote:
...

...
...
...
...
...
...
...
...
Not sure but....
...
...
...
...
I think you are only suffering from a delay of the update to the list.
...
...
...
...
Try waiting for a short while (up to 30min) and look again.
...
...
Others have said it takes that long sometimes but I have only witnessed
...
...
about 5-6min.
...
...
...
...
Guess it depends on how busy the server is.
...
...
...
...
...
...
...mike/kb8jnm
...
...
...
...
...
-------- Original Message --------
...
...
...
Subject: [App_rpt-users] Node Status not showing...
...
...
...
From: Jah Rastafari <nuhtrue@gmail.com>
...
...
...
Date: Sun, January 11, 2015 5:29 pm
...
...
...
To: "app_rpt-users@ohnosec.org" <app_rpt-users@ohnosec.org>
...
...
...
...
...
...
...
...
...
Forgive me if this has already been discussed and I missed it, but I just
...
...
...
noticed recently that although I was connected to a number of other
...
...
...
nodes/repeaters, the 'Node Status' selection on the Allstar site says I'm
...
...
...
not connected to anything. My node(s) show up properly in the available
...
...
...
node list and everything else is as it should be. The Web Transceiver
...
...
works
...
...
...
properly also and I haven't changed anything recently. Am I missing
...
...
...
something?
...
...
...
...
...
...
Bob/ KK6RQ<hr>_______________________________________________
...
...
...
App_rpt-users mailing list
...
...
...
App_rpt-users@ohnosec.org
...
...
...
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
...
...
...
...
...
...
To unsubscribe from this list please visit
...
...
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down
...
...
to the bottom of the page. Enter your email address and press the
...
...
"Unsubscribe or edit options button"
...
...
...
You do not need a password to unsubscribe, you can do it via email
...
...
confirmation. If you have trouble unsubscribing, please send a message to
...
...
the list detailing the problem.
...
...
_______________________________________________

App_rpt-users mailing list

App_rpt-users@ohnosec.org

http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"

You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 

_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

Re: [App_rpt-users] Node Status not showing...

Doug Crompton