It was only being used for clocking the RTCM. I believe the problem is power circuitry radiates bunches of hash and trash. It was interfering with something on VHF high band, like 173.050.. somewhere near there. On Thu, Feb 15, 2018 at 3:41 PM, Bryan Fields <Bryan@bryanfields.net> wrote:
On 2/15/18 6:30 PM, Tim Sawyer wrote:
Sorry to say this, but those are the bad external clock source I mentioned in another post.They are also very dirty. I know one person who's equipment was turned off by the site manager due to PCGM interferance.
Well for setting the 9.6 MHz clock onthe RTCM, it's likely ok. Using it for the PLL reference would not be advised unless you look at it and it's clean.
I've never used them for that.
-- Bryan Fields
727-409-1194 - Voice http://bryanfields.net _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/ cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- Tim WD6AWP