You do not need a timing source to use an RTCM if you don’t want to vote. That’s called mix mode. Looks like you have things set up correctly. Not sure why your getting that message. Have you reset both the RTCM and asterisk? You probably don’t need nodeemp -- Tim :wq On Oct 25, 2013, at 7:06 PM, Richard Bopp <kc0npa@gmail.com> wrote:
I am trying to get a Single RTCM with no GPS to work in simple mode. Does there need to be a gps for a timing source even if I am not using the voting function at all?
I am getting this error in asterisks- WARNING[2368]: chan_voter.c:4511 voter_reader: Voter client master timing source mobile1 attempting to authenticate as mix client!!
_____________________ Here is my voter.conf- [general] port = 667 buflen = 500 password = DCA
[1995] buflen = 800 mobile1 = DCAradios,transmit,nodeemp
________________________ Here is my rtcm conf- 1 - Serial # (1223) (which is MAC ADDR 00:04:A3:00:04:C7) 2 - VOTER Server Address (FQDN) (192.168.1.27) 3 - VOTER Server Port (667), 4 - Local Port (Override) (0) 5 - Client Password (DCAradios), 6 - Host Password (DCA) 7 - Tx Buffer Length (3000) 8 - GPS Data Protocol (0=NMEA, 1=TSIP) (0) 9 - GPS Serial Polarity (0=Non-Inverted, 1=Inverted) (0) 10 - GPS PPS Polarity (0=Non-Inverted, 1=Inverted, 2=NONE) (2) 11 - GPS Baud Rate (4800) 12 - External CTCSS (0=Ignore, 1=Non-Inverted, 2=Inverted) (1) 13 - COR Type (0=Normal, 1=IGNORE COR, 2=No Receiver) (1) 14 - Debug Level (4294967040) 15 - Alt. VOTER Server Address (FQDN) () 16 - Alt. VOTER Server Port (Override) (0) 17 - DSP/BEW Mode NOT SUPPORTED 18 - "Duplex Mode 3" (0=DISABLED, 1-255 Hang Time) (1/10 secs) (255) 19 - Simulcast Launch Delay (65535) (approx 200 ns, 5 = 1us, > 0 to ENA SC)
Thanks, Richard Bopp Kc0npa
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users