FYI Setting the |I values to not have a callsign will crash the asterisk app as quick as you press the transmit button the first time, Settiong totime to 0 will lock out the channel completely with a timeout message that happens immediate upon startup Just figured I'd try these and pass along the info. So far the telemdefault = 0 is the best approach. Alan From: Tim Sawyer [mailto:tim.sawyer@me.com] Sent: Friday, June 01, 2012 12:20 AM To: Alan Adamson Cc: App_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] Looking for a hardwired rpt.conf section duplex = 0 ; Half duplex with no telemetry, courtesy tones or hang time linktolink = yes ; in case whatever you're hooking to likes full duplex ; these attempt to kill IDs but I have no idea if they would work. experiment! totime=0 idrecording=|i idtalkover=|i Can't think of anything else you have to stop at the moment. Maybe others will chime in. -- Tim :wq On May 31, 2012, at 7:47 PM, Alan Adamson wrote: I want to create a completely tone(s) less connection on a uri. It's a hardwired connection that I don't want ID's, announcements, hangtime, CT's etc. Besides using the duplex=0, what else do I need to do to turn all of that off on that node? If you have rpt.conf section that you could share it would be appreciated. Thanks Alan _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users