Duplex=0 seems to work great for my setup! I posted it in a different question but now I am trying to figure out the telemetry problem. I want to only hear the voice if I am dialing out, not if someone is coming in. 73 On Mon, Jul 7, 2014 at 10:40 AM, Jon Rorke <jrorke@cogeco.ca> wrote:
Actually you will hear telemetry if you have the telemetry set to on. So you will hear connect disconnect messages. Jon RQ
On 7/7/2014 11:39 AM, Skyler Fennell wrote:
Thanks mike, the only problem with this is I can't hear telemetry so I don't know if I actually connected to a node because the telemetry would be silent correct? Is there any way to have conformation that I connected to a node so I don't have to just "hope" that I connected to the node?
On Jul 5, 2014, at 11:39 PM, <mike@midnighteng.com> wrote:
Skyler,
If I understand your problem correctly...
Do the same as the repeater... tx pl to the input of the repeater only on valid input of your node.
Your node might do a final (at rest) id but without pl from valid input to node, it will not be captured by the rf repeater input.
...mike/kb8jnm
On 7/3/2014 10:50 AM, Skyler F wrote:
I know this is a major problem that has showed up, and I would like to know if anybody knows how to fix it for the best operation.
Thanks for any help, I am a newbie at the software and CentOS ACID is the first time I have used command line.
Background -There is a remote repeater on a mountain west of me -No internet exists at the site -I can't add any other link in because of antenna expenses -The Rocky Mountain Radio League has held approval for an RF link to the repeater using the input frequency of the repeater
What they will do -Because of the loonngg hang time, they will disable the TX CTCSS right away after the transmission is done. -They will NOT TX CTCSS on their CW ID so I don't have to hear that in the node.
What I am expected to do -Only CW ID when a remote person is transmitting, so when they are coming in from the internet to my node, only ID over their transmission (yes I know the morse will be playing at the same time as the talking) -NO random ID's coming up 10 mins after the conversation is done. I don't want my node to just come up at random times and ID
Any suggestions, any previous attempts for a link like that?
Thanks so much, and any help would be greatly appreciated. The RMRL wants to start getting this along so I would really like some help.
73's
Skyler KDØWHB
-- Skyler Fennell amsatnet.info KDØWHB electricity440@gmail.com
_______________________________________________
App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing listApp_rpt-users@ohnosec.orghttp://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- Skyler Fennell amsatnet.info KDØWHB electricity440@gmail.com