I can connect my Allstar node to yours, but I cannot connect to your node with the my Web transceiver. To me this would seem to point to a problem in the portal somehow - as if your access setting was not working. Ken
-----Original Message----- From: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users- bounces@ohnosec.org] On Behalf Of Peter Dahl Sent: Friday, September 23, 2011 7:23 PM Cc: App_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] Connecting to my node from web transceiver
Ken, Yes, I have enabled User Access via Web Transceiver on the portal settings and the allstar-public stanza is present in both iax.conf and extensions.conf.
Peter
On Sep 23, 2011, at 4:08 PM, Ken wrote:
This works fine on my system
Have you enabled "User Access via Web Transceiver" on the Access Settings menu of the Allstar Node Configuration at the portal?
I find that I cannot connect to your system either.
Does the iax.conf file on your repeater have a [allstar-public] stanza?
Does the extensions.conf file have a stanza of the same name?
73 Ken
-----Original Message----- From: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users- bounces@ohnosec.org] On Behalf Of Michael Carey Sent: Friday, September 23, 2011 6:29 PM To: Peter Dahl Cc: App_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] Connecting to my node from web transceiver
Is there an "issue" using the web transceiver on the same internet service/connection that the node is on? This is something I have wondered about but not ever tested.
Michael. VK5ZEA
On 24/09/2011 07:47, Peter Dahl wrote:
My node , 27595 appears to be fully operational now and ready to be deployed on the air finally except I have one burning question. I can control and access my node both locally and through the phone portal but not with the web transceiver. When I access most other nodes through the web transceiver I am immediately connected to them and the image of the keypad on the web page is active. When I access my node through the web transceiver the "keypad" stays inactive and the audible connection message does not play. What am I missing? Can someone please assist me with this final configuration of my node?
Thanks in advance!
Peter, WA7FUS, Node 27595 Brier, WA _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users