Hello Again, To get correct results - doesn't it make more sense to wire up this: http://www.dmkeng.com/images/URIx_TEST_FIXTURE.pdf
From the above - how does AIN (pin 24) work?
73's, John AJ6BC On Wed, Aug 12, 2015 at 10:39 PM, John C. Westmoreland, P.E. < john@westmorelandengineering.com> wrote:
Hello All,
Here is the wiring instructions from the FAQ:
Pin 1 to Pin 7 Pin 2 to Pin 3 Pin 4 to Pin 8 *Pin 23 to Pin 24* 10K Resistor between Pins 21 and 22 10K Resistor between Pins 21 and *23* For URIx (CM119) only, also include the following connections: Pin 5 to Pin 10 Pin 6 to Pin 11
From uridiag:
Enter your selection:c Special Test Cable Pinout:
25 pin D-shell connector Pin 1 to Pin 7 Pin 2 to Pin 3 Pin 4 to Pin 8 * Pin 11 to Pin 24* 10K Resistor between Pins 21 & 22 10K Resistor between Pins 21 & 23 For URIx (CM119), also include the following: Pin 5 to Pin 10 Pin 6 to Pin* 11* Do *NOT* include these for the standard URI!!
So, which one of these do I use?
73's, John AJ6BC