Hey Ross, I am connected to Pin 4 (Mic-Hi) of the front connector. No mic and no control head. boB - W5EVH On Fri, Aug 16, 2013 at 5:12 AM, Ross Johnson <kc7rjk@comcast.net> wrote:
Hey bob Where are you injecting the audio? There should be plenty of headroom. Is the mic still connected?
Ross www.kc7rjk.net
*From:* Bob Roszkowski <bob@w5evh.org> *Sent:* Thursday, August 15, 2013 8:12 PM *To:* App_rpt-users@ohnosec.org *Subject:* [App_rpt-users] Mastr II and URI low TX audio
I have a Mastr II mobile tuned up in the ham bands. Trying to set the audio levels. RX worked great. Problem with TX audio, I can only get 2KHz deviation max if I set the level to 999 in app_rpt. I am using the URI and have wired it to use the 6db amplifier on board. Anyone else run into this problem?
boB - W5EVH
------------------------------ _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users