Enable the channel driver in modules.conf On 2/15/2018 3:05 PM, ARS W5OMR wrote:
Ok. Got the Rpi3 going. Got an IP address. Went to editing on the .conf files. I'll tweak rpt.conf later, but everywhere I can find, modules, iax, rpt, extensions all the default '1999' info was replaced with 29655 and even got my node/password set in ... one of the .conf files (not in front of the machine right now). So, after all was edited and saved, I plugged in my URIx, got a solid green led , I ran astres.sh and ... The green light... Stays solid. Ugh.
I feel like I've made significant progress, and thanks for all of you guys help before... But I've not had allstar running in about 3 years and I've forgotten more than I think I knew, back then.
I promise... Just a 'bit' more hand-holding, and I have Faith, that when it comes to whatever step I inadvertently left out, I'll smack my forehead and say some colorful metaphors, and kick myself in the keester for forgetting something that I'm sure is going to be "so simple a caveman could do it".
Cavemen are Showoffs... ;-)
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.