where can i find an documentation over all parameters standing in the rpt.conf tnx and 73 de tom dh6mbt ________________________________ Von: app_rpt-users-bounces@ohnosec.org [app_rpt-users-bounces@ohnosec.org] im Auftrag von Monty [monty@ke7jvx.com] Gesendet: Mittwoch, 11. Juli 2012 20:50 An: pete M Cc: APP RPT Betreff: Re: [App_rpt-users] echolink stuff It is a setting in /etc/asterisk/rpt.conf: eannmode=3 ; Default: 1 = Say only node number on echolink connects ; 2 = say phonetic call sign only on echolink connects ; 3 = say phonetic call sign and node number on echolink connects Monty On Wed, Jul 11, 2012 at 11:22 AM, pete M <petem001@hotmail.com<mailto:petem001@hotmail.com>> wrote: Is there a way for a node to specify the call sign rather then the node number whe they connect from echolink? ( I am using the acid distro) If someone connect by the portal we can hear that ve2xx conected, but from the echolink we will hear node 12345 connected.. And where can I write information, like on echolink, that describe the repeater and stuff.. And finally is there a how to for the echolink part, did not found much.. Pierre VE2PF _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org<mailto:App_rpt-users@ohnosec.org> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users