Needed help with XIPPR_ROIP and iaXrpt
Hello, I'm doing my first installation of XIPPR_ROIP. I'm using a URIx and I have checked that this works well with the repeater I connected, I mean I can make it to transmit and receive. But I have not had success trying to connect to the server from the client application iaXrpt (Xelatec). I do miss something? I would appreciate any suggestions or help. Federico Boesche GUA: +502 5208 4013 skype: fboesche msm: federico@electronicacelular.com
Carefully follow these instructions. http://www.xelatec.com/xipar/iaxrpt/ http://www.xelatec.com/xipar/node/89 -- Tim :wq On Jul 11, 2012, at 7:10 AM, Federico Boesche wrote:
Hello, I'm doing my first installation of XIPPR_ROIP. I'm using a URIx and I have checked that this works well with the repeater I connected, I mean I can make it to transmit and receive. But I have not had success trying to connect to the server from the client application iaXrpt (Xelatec). I do miss something? I would appreciate any suggestions or help.
Federico Boesche
GUA: +502 5208 4013 skype: fboesche msm: federico@electronicacelular.com
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
Is there a way for a node to specify the call sign rather then the node number whe they connect from echolink? ( I am using the acid distro) If someone connect by the portal we can hear that ve2xx conected, but from the echolink we will hear node 12345 connected.. And where can I write information, like on echolink, that describe the repeater and stuff.. And finally is there a how to for the echolink part, did not found much.. Pierre VE2PF
It is a setting in /etc/asterisk/rpt.conf: eannmode=3 ; Default: 1 = Say only node number on echolink connects ; 2 = say phonetic call sign only on echolink connects ; 3 = say phonetic call sign and node number on echolink connects Monty On Wed, Jul 11, 2012 at 11:22 AM, pete M <petem001@hotmail.com> wrote:
Is there a way for a node to specify the call sign rather then the node number whe they connect from echolink? ( I am using the acid distro)
If someone connect by the portal we can hear that ve2xx conected, but from the echolink we will hear node 12345 connected..
And where can I write information, like on echolink, that describe the repeater and stuff..
And finally is there a how to for the echolink part, did not found much..
Pierre VE2PF
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
Thanks Monty! From: Monty Sent: Wednesday, July 11, 2012 2:50 PM To: pete M Cc: APP RPT Subject: Re: [App_rpt-users] echolink stuff It is a setting in /etc/asterisk/rpt.conf: eannmode=3 ; Default: 1 = Say only node number on echolink connects ; 2 = say phonetic call sign only on echolink connects ; 3 = say phonetic call sign and node number on echolink connects Monty On Wed, Jul 11, 2012 at 11:22 AM, pete M <petem001@hotmail.com> wrote: Is there a way for a node to specify the call sign rather then the node number whe they connect from echolink? ( I am using the acid distro) If someone connect by the portal we can hear that ve2xx conected, but from the echolink we will hear node 12345 connected.. And where can I write information, like on echolink, that describe the repeater and stuff.. And finally is there a how to for the echolink part, did not found much.. Pierre VE2PF _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
Ive used this but the incorrect callsign is being reported. I downloaded latest code from svn but problem still there. Sent from my iPhone On Jul 11, 2012, at 2:50 PM, Monty <monty@ke7jvx.com> wrote:
It is a setting in /etc/asterisk/rpt.conf:
eannmode=3 ; Default: 1 = Say only node number on echolink connects ; 2 = say phonetic call sign only on echolink connects ; 3 = say phonetic call sign and node number on echolink connects
Monty
On Wed, Jul 11, 2012 at 11:22 AM, pete M <petem001@hotmail.com> wrote: Is there a way for a node to specify the call sign rather then the node number whe they connect from echolink? ( I am using the acid distro)
If someone connect by the portal we can hear that ve2xx conected, but from the echolink we will hear node 12345 connected..
And where can I write information, like on echolink, that describe the repeater and stuff..
And finally is there a how to for the echolink part, did not found much..
Pierre VE2PF
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
where can i find an documentation over all parameters standing in the rpt.conf tnx and 73 de tom dh6mbt ________________________________ Von: app_rpt-users-bounces@ohnosec.org [app_rpt-users-bounces@ohnosec.org] im Auftrag von Monty [monty@ke7jvx.com] Gesendet: Mittwoch, 11. Juli 2012 20:50 An: pete M Cc: APP RPT Betreff: Re: [App_rpt-users] echolink stuff It is a setting in /etc/asterisk/rpt.conf: eannmode=3 ; Default: 1 = Say only node number on echolink connects ; 2 = say phonetic call sign only on echolink connects ; 3 = say phonetic call sign and node number on echolink connects Monty On Wed, Jul 11, 2012 at 11:22 AM, pete M <petem001@hotmail.com<mailto:petem001@hotmail.com>> wrote: Is there a way for a node to specify the call sign rather then the node number whe they connect from echolink? ( I am using the acid distro) If someone connect by the portal we can hear that ve2xx conected, but from the echolink we will hear node 12345 connected.. And where can I write information, like on echolink, that describe the repeater and stuff.. And finally is there a how to for the echolink part, did not found much.. Pierre VE2PF _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org<mailto:App_rpt-users@ohnosec.org> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
You can find the chan_echolink documentation here: http://ohnosec.org/drupal/node/56 Jim, K6JWN On Tue, Jul 17, 2012 at 3:34 AM, torben@klimt-online.com <torben@klimt-online.com> wrote:
where can i find an documentation over all parameters standing in the rpt.conf
tnx and 73 de tom dh6mbt
________________________________ Von: app_rpt-users-bounces@ohnosec.org [app_rpt-users-bounces@ohnosec.org] im Auftrag von Monty [monty@ke7jvx.com] Gesendet: Mittwoch, 11. Juli 2012 20:50 An: pete M Cc: APP RPT Betreff: Re: [App_rpt-users] echolink stuff
It is a setting in /etc/asterisk/rpt.conf:
eannmode=3 ; Default: 1 = Say only node number on echolink connects ; 2 = say phonetic call sign only on echolink connects ; 3 = say phonetic call sign and node number on echolink connects
Monty
On Wed, Jul 11, 2012 at 11:22 AM, pete M <petem001@hotmail.com> wrote:
Is there a way for a node to specify the call sign rather then the node number whe they connect from echolink? ( I am using the acid distro)
If someone connect by the portal we can hear that ve2xx conected, but from the echolink we will hear node 12345 connected..
And where can I write information, like on echolink, that describe the repeater and stuff..
And finally is there a how to for the echolink part, did not found much..
Pierre VE2PF
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
participants (7)
-
Federico Boesche -
James Nessen -
KP4TR (Ramon Gonzalez) -
Monty -
pete M -
Tim Sawyer -
torben＠klimt-online.com