Try commenting out the link2link=1 in rpt conf. then reload the RPT conf. Jon If you have a tail on the sinplex mode then you dont need that. Its for connecting a node to a harware controller with full duplex and no tails or ids. On 6/24/2013 1:46 PM, James Hill wrote:
On 24/06/2013 18:40, Jon Rorke wrote:
Since this is a half duplex radio, make sure you have duplex=1 in rpt.conf _and_ in usbradio.conf you have duplex = 0.
If usbradio has duplex = 1 then it thinks you have a full duplex radio. You need to tell usbradio it is half duplex.
Hi John,
usbradio.conf is duplex=0 - Always has been!
I've done a few more tests to rule out hardware (such as removing the USB wlan dongle, rebooting & running on a cable) but still no luck.
usbradio.conf contents are pasted below, for anyone that is interested:
; ; Usbradio channel driver Configuration File ;
[general]
[usb29681]
hdwtype=0 rxboost=1 txboost=1 rxctcssrelax=1 ;#txctcssdefault=100.0 ;#rxctcssfreqs=100.0 ;#txctcssfreqs=100.0 ;rxctcssoverride=0 carrierfrom=vox ctcssfrom=no rxdemod=speaker txprelim=no txlimonly=no txtoctype=notone txmixa=voice txmixb=no invertptt=0 duplex=0 rxondelay=0 rxnoisefiltype=0 eeprom=0
#includeifexists custom/usbradio.conf
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users