The Pi Zero W is essentially the same hardware as the original Pi B. Back when they were first released, many people tried to get AllStar working on that platform, and the performance really was not there. You really didn’t get enough performance out of the Pi platform until the Pi 2. Jeremy, NQ0M From: App_rpt-users [mailto:app_rpt-users-bounces@lists.allstarlink.org] On Behalf Of Will Bashlor Sent: Saturday, November 11, 2017 8:47 PM To: Users of Asterisk app_rpt <app_rpt-users@lists.allstarlink.org> Subject: Re: [App_rpt-users] Pi Zero W? I tried DIAL and hamvoip versions, neither would boot on the Pi Zero W. I'm not a programmer and don't usually compile anything at all, actually I try to avoid it. I'm guessing AllStar can be compiled manually with Raspbian Lite. If anyone has any links or instructions how I can compile AllStar on Raspbian Lite I'd be glad to try and attempt it. In the mean time I'll begin researching it. 73 On Tue, Nov 7, 2017 at 5:56 PM, Andrew Sylthe <asylthe@kc9ona.com <mailto:asylthe@kc9ona.com> > wrote: The build you mentioned doesn't support the Pi Zero. On Nov 7, 2017 3:51 PM, "Michael Lee Lockwood" <michael@lockwood.us.com <mailto:michael@lockwood.us.com> > wrote: Why not use the app_rpt build that’s already setup for RPi? www.hamvoip.org <http://www.hamvoip.org> _____ From: App_rpt-users <app_rpt-users-bounces@lists.allstarlink.org <mailto:app_rpt-users-bounces@lists.allstarlink.org> > on behalf of Will Bashlor <will@bashlor.com <mailto:will@bashlor.com> > Sent: Tuesday, November 7, 2017 3:46:26 PM To: 'Users of Asterisk app_rpt' Subject: Re: [App_rpt-users] Pi Zero W? Nothing to report, but I just purchased a Pi Zero W yesterday for testing with AllStar. It should be here Friday. From: App_rpt-users [mailto:app_rpt-users-bounces@lists.allstarlink.org <mailto:app_rpt-users-bounces@lists.allstarlink.org> ] On Behalf Of William Higgins Sent: Tuesday, November 7, 2017 4:25 PM To: app_rpt-users@lists.allstarlink.org <mailto:app_rpt-users@lists.allstarlink.org> Subject: [App_rpt-users] Pi Zero W? I have tried using the regular DIAL RAT_RC1 image and it doesn't boot. (Just took a shot.) Has anyone tried to install the DIAL build of Allstar onto a Raspberry Pi Zero W with regular Raspbian Light on it? What experiences did you have? Thinking about a very low power mobile node. Bill _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org <mailto:App_rpt-users@lists.allstarlink.org> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org <mailto:App_rpt-users@lists.allstarlink.org> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.