I have tried using the regular DIAL RAT_RC1 image and it doesn't boot. (Just took a shot.) Has anyone tried to install the DIAL build of Allstar onto a Raspberry Pi Zero W with regular Raspbian Light on it? What experiences did you have? Thinking about a very low power mobile node. Bill
Nothing to report, but I just purchased a Pi Zero W yesterday for testing with AllStar. It should be here Friday. From: App_rpt-users [mailto:app_rpt-users-bounces@lists.allstarlink.org] On Behalf Of William Higgins Sent: Tuesday, November 7, 2017 4:25 PM To: app_rpt-users@lists.allstarlink.org Subject: [App_rpt-users] Pi Zero W? I have tried using the regular DIAL RAT_RC1 image and it doesn't boot. (Just took a shot.) Has anyone tried to install the DIAL build of Allstar onto a Raspberry Pi Zero W with regular Raspbian Light on it? What experiences did you have? Thinking about a very low power mobile node. Bill
Why not use the app_rpt build that’s already setup for RPi? www.hamvoip.org ________________________________ From: App_rpt-users <app_rpt-users-bounces@lists.allstarlink.org> on behalf of Will Bashlor <will@bashlor.com> Sent: Tuesday, November 7, 2017 3:46:26 PM To: 'Users of Asterisk app_rpt' Subject: Re: [App_rpt-users] Pi Zero W? Nothing to report, but I just purchased a Pi Zero W yesterday for testing with AllStar. It should be here Friday. From: App_rpt-users [mailto:app_rpt-users-bounces@lists.allstarlink.org] On Behalf Of William Higgins Sent: Tuesday, November 7, 2017 4:25 PM To: app_rpt-users@lists.allstarlink.org Subject: [App_rpt-users] Pi Zero W? I have tried using the regular DIAL RAT_RC1 image and it doesn't boot. (Just took a shot.) Has anyone tried to install the DIAL build of Allstar onto a Raspberry Pi Zero W with regular Raspbian Light on it? What experiences did you have? Thinking about a very low power mobile node. Bill
That’s my plan... Sent from my iPhone
On Nov 7, 2017, at 4:51 PM, Michael Lee Lockwood <michael@lockwood.us.com> wrote:
Why not use the app_rpt build that’s already setup for RPi?
www.hamvoip.org
From: App_rpt-users <app_rpt-users-bounces@lists.allstarlink.org> on behalf of Will Bashlor <will@bashlor.com> Sent: Tuesday, November 7, 2017 3:46:26 PM To: 'Users of Asterisk app_rpt' Subject: Re: [App_rpt-users] Pi Zero W?
Nothing to report, but I just purchased a Pi Zero W yesterday for testing with AllStar. It should be here Friday.
From: App_rpt-users [mailto:app_rpt-users-bounces@lists.allstarlink.org] On Behalf Of William Higgins Sent: Tuesday, November 7, 2017 4:25 PM To: app_rpt-users@lists.allstarlink.org Subject: [App_rpt-users] Pi Zero W?
I have tried using the regular DIAL RAT_RC1 image and it doesn't boot. (Just took a shot.)
Has anyone tried to install the DIAL build of Allstar onto a Raspberry Pi Zero W with regular Raspbian Light on it? What experiences did you have?
Thinking about a very low power mobile node.
Bill
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
The build you mentioned doesn't support the Pi Zero. On Nov 7, 2017 3:51 PM, "Michael Lee Lockwood" <michael@lockwood.us.com> wrote:
Why not use the app_rpt build that’s already setup for RPi?
www.hamvoip.org
------------------------------ *From:* App_rpt-users <app_rpt-users-bounces@lists.allstarlink.org> on behalf of Will Bashlor <will@bashlor.com> *Sent:* Tuesday, November 7, 2017 3:46:26 PM *To:* 'Users of Asterisk app_rpt' *Subject:* Re: [App_rpt-users] Pi Zero W?
Nothing to report, but I just purchased a Pi Zero W yesterday for testing with AllStar. It should be here Friday.
*From:* App_rpt-users [mailto:app_rpt-users-bounces@lists.allstarlink.org] *On Behalf Of *William Higgins *Sent:* Tuesday, November 7, 2017 4:25 PM *To:* app_rpt-users@lists.allstarlink.org *Subject:* [App_rpt-users] Pi Zero W?
I have tried using the regular DIAL RAT_RC1 image and it doesn't boot. (Just took a shot.)
Has anyone tried to install the DIAL build of Allstar onto a Raspberry Pi Zero W with regular Raspbian Light on it? What experiences did you have?
Thinking about a very low power mobile node.
Bill
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/ cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
I tried DIAL and hamvoip versions, neither would boot on the Pi Zero W. I'm not a programmer and don't usually compile anything at all, actually I try to avoid it. I'm guessing AllStar can be compiled manually with Raspbian Lite. If anyone has any links or instructions how I can compile AllStar on Raspbian Lite I'd be glad to try and attempt it. In the mean time I'll begin researching it. 73 On Tue, Nov 7, 2017 at 5:56 PM, Andrew Sylthe <asylthe@kc9ona.com> wrote:
The build you mentioned doesn't support the Pi Zero.
On Nov 7, 2017 3:51 PM, "Michael Lee Lockwood" <michael@lockwood.us.com> wrote:
Why not use the app_rpt build that’s already setup for RPi?
www.hamvoip.org
------------------------------ *From:* App_rpt-users <app_rpt-users-bounces@lists.allstarlink.org> on behalf of Will Bashlor <will@bashlor.com> *Sent:* Tuesday, November 7, 2017 3:46:26 PM *To:* 'Users of Asterisk app_rpt' *Subject:* Re: [App_rpt-users] Pi Zero W?
Nothing to report, but I just purchased a Pi Zero W yesterday for testing with AllStar. It should be here Friday.
*From:* App_rpt-users [mailto:app_rpt-users-bounces@lists.allstarlink.org] *On Behalf Of *William Higgins *Sent:* Tuesday, November 7, 2017 4:25 PM *To:* app_rpt-users@lists.allstarlink.org *Subject:* [App_rpt-users] Pi Zero W?
I have tried using the regular DIAL RAT_RC1 image and it doesn't boot. (Just took a shot.)
Has anyone tried to install the DIAL build of Allstar onto a Raspberry Pi Zero W with regular Raspbian Light on it? What experiences did you have?
Thinking about a very low power mobile node.
Bill
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/c gi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/ cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
The Pi Zero W is essentially the same hardware as the original Pi B. Back when they were first released, many people tried to get AllStar working on that platform, and the performance really was not there. You really didn’t get enough performance out of the Pi platform until the Pi 2. Jeremy, NQ0M From: App_rpt-users [mailto:app_rpt-users-bounces@lists.allstarlink.org] On Behalf Of Will Bashlor Sent: Saturday, November 11, 2017 8:47 PM To: Users of Asterisk app_rpt <app_rpt-users@lists.allstarlink.org> Subject: Re: [App_rpt-users] Pi Zero W? I tried DIAL and hamvoip versions, neither would boot on the Pi Zero W. I'm not a programmer and don't usually compile anything at all, actually I try to avoid it. I'm guessing AllStar can be compiled manually with Raspbian Lite. If anyone has any links or instructions how I can compile AllStar on Raspbian Lite I'd be glad to try and attempt it. In the mean time I'll begin researching it. 73 On Tue, Nov 7, 2017 at 5:56 PM, Andrew Sylthe <asylthe@kc9ona.com <mailto:asylthe@kc9ona.com> > wrote: The build you mentioned doesn't support the Pi Zero. On Nov 7, 2017 3:51 PM, "Michael Lee Lockwood" <michael@lockwood.us.com <mailto:michael@lockwood.us.com> > wrote: Why not use the app_rpt build that’s already setup for RPi? www.hamvoip.org <http://www.hamvoip.org> _____ From: App_rpt-users <app_rpt-users-bounces@lists.allstarlink.org <mailto:app_rpt-users-bounces@lists.allstarlink.org> > on behalf of Will Bashlor <will@bashlor.com <mailto:will@bashlor.com> > Sent: Tuesday, November 7, 2017 3:46:26 PM To: 'Users of Asterisk app_rpt' Subject: Re: [App_rpt-users] Pi Zero W? Nothing to report, but I just purchased a Pi Zero W yesterday for testing with AllStar. It should be here Friday. From: App_rpt-users [mailto:app_rpt-users-bounces@lists.allstarlink.org <mailto:app_rpt-users-bounces@lists.allstarlink.org> ] On Behalf Of William Higgins Sent: Tuesday, November 7, 2017 4:25 PM To: app_rpt-users@lists.allstarlink.org <mailto:app_rpt-users@lists.allstarlink.org> Subject: [App_rpt-users] Pi Zero W? I have tried using the regular DIAL RAT_RC1 image and it doesn't boot. (Just took a shot.) Has anyone tried to install the DIAL build of Allstar onto a Raspberry Pi Zero W with regular Raspbian Light on it? What experiences did you have? Thinking about a very low power mobile node. Bill _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org <mailto:App_rpt-users@lists.allstarlink.org> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org <mailto:App_rpt-users@lists.allstarlink.org> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
On 11/7/17 4:51 PM, Michael Lee Lockwood wrote:
Why not use the app_rpt build that’s already setup for RPi> www.hamvoip.org
Why not? HamVoIP.org agreed to provide source code, and are violating the trust of the community by refusing to honor their commitment. They have no right to distribute app_rpt, asterisk or DAHDI. Good luck getting it working without source on a different platform too. The PiZero is so under powered it may not be able to do much. I've compiled the main codebase on one and was unable to get it to run well on the Pi0 Zero even with simple USB interface for anything other than a basic controller. Once the IAX connection came up, it would just die. This jives with what I saw on http://www.raspberry-asterisk.org/ where 2 SIP calls had the CPU at 80%. At that rate it's not if, but when it will drop packets. The idea of asterisk/Zapata telephony was to replace custom hardware with CPU as the cost of CPU dropped. Using a Pi Zero is kinda taking that to extremes in that the audio interface now costs more than the CPU. I realized it's a neat platform, but a normal Pi3 is $50 with card and power supply and such a small cost of the project it's not worth messing with an under-powered single core box. Please mess with it if you want, and certainly if you enjoy it, but the cost savings wasn't worth it for me. At $5 give it's worth giving it a try, maybe you'll be able to get it working as an embedded device. 73 -- Bryan Fields 727-409-1194 - Voice http://bryanfields.net
participants (6)
-
Andrew Sylthe -
Bryan Fields -
Jeremy Utley -
Michael Lee Lockwood -
Will Bashlor -
William Higgins