On 2/27/12 11:21 AM, Jim W7RY wrote:
No. I did not add them... Why aren't they in there? How would you know to add them? Or how to add them? Shouldn't this already be in there?
Not necessarily. Some folks want stuff like that in there, others don't see a need for it. Since app_rpt is pretty much roll-your-own and make it work like you want it to, in the spirit of open source, the shell system is there which works; any modifications or tweaking are up to the end user. You think this is a chore...try learning the command syntax and macro language for hardware. At least asterisk is a bit more natural-language oriented and simple to modify config files with a simple editor like VI or PICO.
Also, it seems that if my internet connection get's interrupted, I have to reboot the node to get it to connect again. After the internet interruption, I can't control anything. The repeater still repeats and provides audio and PTT, but it will neither connect or disconnect from/to anything. Any ideas there?
It takes a while (10 min/20 min?) for your node to reregister with the upstream server. You shouldn't have to reboot; unless your ISP is (probably) assigning you a random IP address out of the DHCP (Dynamic Host Configuration Protocol) pool they have, in which case, if your address changes at your end, then it has to re-propagate, again, upstream. It's not a bug, it's a feature, they say. If your internet connection is interrupted...just wait a few minutes. Your node will reregister with Jim's servers when it reconnects. Unless you have other issues in your network equipment that really aren't the fault of asterisk to resolve.
Thanks for all the help! Jim W7RY
-------------------------------------------------- From: "Corey Dean" <n3fe@repeater.net> Sent: Sunday, February 26, 2012 8:18 AM To: "Jim W7RY" <w7ry@centurytel.net>; "David KE6UPI" <dshaw@ke6upi.com> Cc: <app_rpt-users@ohnosec.org> Subject: RE: [App_rpt-users] Connection Timer?
Did you add them into your rpt.conf file?
Corey N3FE ________________________________________ From: app_rpt-users-bounces@ohnosec.org [app_rpt-users-bounces@ohnosec.org] On Behalf Of Jim W7RY [w7ry@centurytel.net] Sent: Sunday, February 26, 2012 12:17 AM To: David KE6UPI Cc: app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] Connection Timer?
Those commands don't work. Any idea why? *3 node works just fine.
73 Jim W7RY
From: David KE6UPI<mailto:dshaw@ke6upi.com> Sent: Saturday, February 25, 2012 1:02 PM To: Jim W7RY<mailto:w7ry@centurytel.net> Cc: app_rpt-users@ohnosec.org<mailto:app_rpt-users@ohnosec.org> Subject: Re: [App_rpt-users] Connection Timer?
*953 is to connect *951 is to disconnect
On Sat, Feb 25, 2012 at 8:28 AM, Jim W7RY <w7ry@centurytel.net<mailto:w7ry@centurytel.net>> wrote: Or will *953 node be better...
I wish answers would be more clear on here for us un-experienced users. (The same goes for the documentation)...
Thanks 73 Jim W7RY
From: David KE6UPI<mailto:dshaw@ke6upi.com> Sent: Saturday, February 25, 2012 7:43 AM To: Jim W7RY<mailto:w7ry@centurytel.net> Cc: app_rpt-users@ohnosec.org<mailto:app_rpt-users@ohnosec.org> Subject: Re: [App_rpt-users] Connection Timer?
Jim, No there is no timer. But if one of the nodes loses the Internet then it will drop out with the uses of *3node. The only timer is one the remote base nodes.
So use the following:
950=ilink,7 ; Node which last transmitted to us 951=ilink,11 ; Specific Link permanent connect - Disconnect 952=ilink,12 ; Specific Link permanent connect - monitor only 953=ilink,13 ; Specific Link permanent connect - transceive 954=ilink,6 ; Disconnect all links including permalinks
The above linking will connect reconnect if there is a drop in the network. It will reconnect quietly.
David
i.e. *950node
On Fri, Feb 24, 2012 at 10:15 PM, Jim W7RY <w7ry@centurytel.net<mailto:w7ry@centurytel.net>> wrote: Is there a connection timer hiding somewhere in my node? I'm having issues staying connected to the Win System node 2560.
If so, can someone please point me to it?
Thanks 73 Jim W7RY
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org<mailto:App_rpt-users@ohnosec.org> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
No virus found in this message. Checked by AVG - www.avg.com<http://www.avg.com> Version: 2012.0.1913 / Virus Database: 2114/4829 - Release Date: 02/24/12
No virus found in this message. Checked by AVG - www.avg.com<http://www.avg.com> Version: 2012.0.1913 / Virus Database: 2114/4831 - Release Date: 02/25/12
-- This message was scanned and is believed to be clean. Click here to report this message as spam.<http://simba.repeater.net:8080/cgi-bin/learn-msg.cgi?id=126011FA8.A9043>
----- No virus found in this message. Checked by AVG - www.avg.com Version: 2012.0.1913 / Virus Database: 2114/4832 - Release Date: 02/25/12
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
-- Bryan In this world, you must be oh so smart or oh so pleasant. Well, for years I was smart. I recommend pleasant. You may quote me. Sent from my MacBook Pro.