MP3 from the asterisk 1.4 add-ons has worked fine for me on several machines but in any case I have a stop playback command Cop 24 does it. I used 999 for the function but that is probably not a good choice any more 999=cop,24 Ken cop (control operator) cmds: * * 1 - System warm boot * 2 - System enable * 3 - System disable * 4 - Test Tone On/Off * 5 - Dump System Variables on Console (debug) * 6 - PTT (phone mode only) * 7 - Time out timer enable * 8 - Time out timer disable * 9 - Autopatch enable * 10 - Autopatch disable * 11 - Link enable * 12 - Link disable * 13 - Query System State * 14 - Change System State * 15 - Scheduler Enable * 16 - Scheduler Disable * 17 - User functions (time, id, etc) enable * 18 - User functions (time, id, etc) disable * 19 - Select alternate hang timer * 20 - Select standard hang timer * 21 - Enable Parrot Mode * 22 - Disable Parrot Mode * 23 - Birdbath (Current Parrot Cleanup/Flush) * 24 - Flush all telemetry * 25 - Query last node un-keyed * 26 - Query all nodes keyed/unkeyed * 27 - Reset DAQ minimum on a pin * 28 - Reset DAQ maximum on a pin * 30 - Recall Memory Setting in Attached Xcvr * 31 - Channel Selector for Parallel Programmed Xcvr * 32 - Touchtone pad test: command + Digit string + # to playback all digits pressed * 33 - Local Telemetry Output Enable * 34 - Local Telemetry Output Disable * 35 - Local Telemetry Output on Demand * 36 - Foreign Link Local Output Path Enable * 37 - Foreign Link Local Output Path Disable * 38 - Foreign Link Local Output Path Follows Local Telemetry * 39 - Foreign Link Local Output Path on Demand * 40 - IRLP announce Enable * 41 - IRLP announce Disable * 42 - Echolink announce node # only * 43 - Echolink announce node Callsign only * 44 - Echolink announce node # & Callsign * 45 - Link Activity timer enable * 46 - Link Activity timer disable * 47 - Reset "Link Config Changed" Flag * 48 - Send Page Tone (Tone specs separated by parenthesis) * 49 - Disable incoming connections (control state noice) * 50 - Enable incoming connections (control state noicd) * 51 - Enable sleep mode * 52 - Disable sleep mode * 53 - Wake up from sleep * 54 - Go to sleep * 55 - Parrot Once if parrot mode is disabled From: app_rpt-users-bounces@qrvc.com [mailto:app_rpt-users-bounces@qrvc.com] On Behalf Of KI6PSP (Ed) Sent: Sunday, October 03, 2010 1:02 AM To: app_rpt-users@qrvc.com Subject: [App_rpt-users] Is there a "Be Quiet" command? I setup a script to re-transmit the ARRL Audio news on the club Allstar Node. Here is my question, is there a way to kill playback of a file, in case there is emergancy traffic during the news? I tried the Parrot Kill command with no effect. http://ki6psp.blogspot.com/2010/09/arrl-news-on-allstar-node.html -- KI6PSP (Ed)