Just to be clear, ALL the channel drivers in my repo need testing. None of them should be considered ready to run. Steve On 7/19/2018 12:36 PM, Joe KD2NFC wrote:
That is good to hear Steve.
Joe Kd2nfc
On Jul 19, 2018, at 10:56 AM, Steve Zingman <szingman@msgstor.com <mailto:szingman@msgstor.com>> wrote:
ALSARadio and RPiRadio could be built and added (as a test) SimpleUSB and USBRadio could be built and replace the existing channel drivers. That was going to be my next step. I don't know what the dev team is planning.
Steve N4IRS
On 7/19/2018 10:22 AM, Mike wrote:
I'm going to be busy for the next week (i think) but could you send me a 'peek' at those raw channel driver files. I just want to see what's going on in a 'study' of it.
But it all sounds good and I think we are missing the ball by not utilizing the gpio.
Perhaps just needs a 'kick-start'
...mike/kb8jnm
On 07/18/2018 11:46 PM, Joe Puma wrote:
these are channel drivers that enable the gpio on the raspberry pi. They need to be complied. I have a complier that will just compile the module. Maybe someone here can provide it to the OP. Would be great if these channel drivers can be included in regular builds of ASL.
https://github.com/N4IRS/ASL_GPIO
Joe kd2nfc.
On Jul 17, 2018, at 11:08 PM, Mike <mm@midnighteng.com <mailto:mm@midnighteng.com>> wrote:
Angelo, welcome aboard !
The answer to your question for the net is...
Outside of buying a pre-altered sound fob,
There appears to be some provision out there or in the making to use GPIO pins on the Pi for PTT and COR for radio/repeater
so I sent this reply to the list in the hopes someone can add something to that or point to some documentation.
...mike/kb8jnm
On 7/17/2018 8:03 PM, Angelo T Sonnesso wrote:
Hay Mike, Thanks for the reminder. I am fairly new to Allstar, and I can use all of the information I can get. 73 N2DYN Angelo *From:*App_rpt-users<app_rpt-users-bounces@lists.allstarlink.org>*On Behalf Of*Mike *Sent:*Tuesday, July 17, 2018 6:17 PM *To:*app_rpt-users@lists.allstarlink.org *Subject:*[App_rpt-users] *** Reminder***Net Tonight (July 17 2018)
Tonight @ 8:30 edt /00:30utc - connection details www.29999.link <http://www.29999.link/>- please connect 15m early.
ASL Micro/Portable Nodes/Repeaters with WX8L/Sean as our Guest Speaker
*https://wx8l.blogspot.com/2018/06/personal-allstar-pocket-node-based-on.html...
...mike/kb8jnm
_______________________________________________
-- Why don't I get email from Doogie telling me I should run a different version of AllStarLink? _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org <mailto:App_rpt-users@lists.allstarlink.org> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.