Tonight @ 8:30 edt /00:30utc - connection details www.29999.link - please connect 15m early. ASL Micro/Portable Nodes/Repeaters with WX8L/Sean as our Guest Speaker https://wx8l.blogspot.com/2018/06/personal-allstar-pocket-node-based-on.html ...mike/kb8jnm
Hay Mike, Thanks for the reminder. I am fairly new to Allstar, and I can use all of the information I can get. 73 N2DYN Angelo From: App_rpt-users <app_rpt-users-bounces@lists.allstarlink.org> On Behalf Of Mike Sent: Tuesday, July 17, 2018 6:17 PM To: app_rpt-users@lists.allstarlink.org Subject: [App_rpt-users] *** Reminder***Net Tonight (July 17 2018) Tonight @ 8:30 edt /00:30utc - connection details www.29999.link <http://www.29999.link> - please connect 15m early. ASL Micro/Portable Nodes/Repeaters with WX8L/Sean as our Guest Speaker https://wx8l.blogspot.com/2018/06/personal-allstar-pocket-node-based-on.html ...mike/kb8jnm
Angelo, welcome aboard ! The answer to your question for the net is... Outside of buying a pre-altered sound fob, There appears to be some provision out there or in the making to use GPIO pins on the Pi for PTT and COR for radio/repeater so I sent this reply to the list in the hopes someone can add something to that or point to some documentation. ...mike/kb8jnm On 7/17/2018 8:03 PM, Angelo T Sonnesso wrote:
Hay Mike,
Thanks for the reminder.
I am fairly new to Allstar, and I can use all of the information I can get.
73 N2DYN Angelo
*From:*App_rpt-users <app_rpt-users-bounces@lists.allstarlink.org> *On Behalf Of *Mike *Sent:* Tuesday, July 17, 2018 6:17 PM *To:* app_rpt-users@lists.allstarlink.org *Subject:* [App_rpt-users] *** Reminder***Net Tonight (July 17 2018)
Tonight @ 8:30 edt /00:30utc - connection details www.29999.link <http://www.29999.link> - please connect 15m early.
ASL Micro/Portable Nodes/Repeaters with WX8L/Sean as our Guest Speaker
*https://wx8l.blogspot.com/2018/06/personal-allstar-pocket-node-based-on.html...
...mike/kb8jnm
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
these are channel drivers that enable the gpio on the raspberry pi. They need to be complied. I have a complier that will just compile the module. Maybe someone here can provide it to the OP. Would be great if these channel drivers can be included in regular builds of ASL. https://github.com/N4IRS/ASL_GPIO <https://github.com/N4IRS/ASL_GPIO> Joe kd2nfc.
On Jul 17, 2018, at 11:08 PM, Mike <mm@midnighteng.com> wrote:
Angelo, welcome aboard !
The answer to your question for the net is...
Outside of buying a pre-altered sound fob,
There appears to be some provision out there or in the making to use GPIO pins on the Pi for PTT and COR for radio/repeater
so I sent this reply to the list in the hopes someone can add something to that or point to some documentation.
...mike/kb8jnm
On 7/17/2018 8:03 PM, Angelo T Sonnesso wrote:
Hay Mike, Thanks for the reminder. I am fairly new to Allstar, and I can use all of the information I can get.
73 N2DYN Angelo
From: App_rpt-users <app_rpt-users-bounces@lists.allstarlink.org> <mailto:app_rpt-users-bounces@lists.allstarlink.org> On Behalf Of Mike Sent: Tuesday, July 17, 2018 6:17 PM To: app_rpt-users@lists.allstarlink.org <mailto:app_rpt-users@lists.allstarlink.org> Subject: [App_rpt-users] *** Reminder***Net Tonight (July 17 2018)
Tonight @ 8:30 edt /00:30utc - connection details www.29999.link <http://www.29999.link/> - please connect 15m early.
ASL Micro/Portable Nodes/Repeaters with WX8L/Sean as our Guest Speaker
https://wx8l.blogspot.com/2018/06/personal-allstar-pocket-node-based-on.html <https://wx8l.blogspot.com/2018/06/personal-allstar-pocket-node-based-on.html>
...mike/kb8jnm
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org <mailto:App_rpt-users@lists.allstarlink.org> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users <http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users>
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users <http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org <mailto:App_rpt-users@lists.allstarlink.org> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users <http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users>
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users <http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
I'm going to be busy for the next week (i think) but could you send me a 'peek' at those raw channel driver files. I just want to see what's going on in a 'study' of it. But it all sounds good and I think we are missing the ball by not utilizing the gpio. Perhaps just needs a 'kick-start' ...mike/kb8jnm On 07/18/2018 11:46 PM, Joe Puma wrote:
these are channel drivers that enable the gpio on the raspberry pi. They need to be complied. I have a complier that will just compile the module. Maybe someone here can provide it to the OP. Would be great if these channel drivers can be included in regular builds of ASL.
https://github.com/N4IRS/ASL_GPIO
Joe kd2nfc.
On Jul 17, 2018, at 11:08 PM, Mike <mm@midnighteng.com <mailto:mm@midnighteng.com>> wrote:
Angelo, welcome aboard !
The answer to your question for the net is...
Outside of buying a pre-altered sound fob,
There appears to be some provision out there or in the making to use GPIO pins on the Pi for PTT and COR for radio/repeater
so I sent this reply to the list in the hopes someone can add something to that or point to some documentation.
...mike/kb8jnm
On 7/17/2018 8:03 PM, Angelo T Sonnesso wrote:
Hay Mike, Thanks for the reminder. I am fairly new to Allstar, and I can use all of the information I can get. 73 N2DYN Angelo *From:*App_rpt-users<app_rpt-users-bounces@lists.allstarlink.org>*On Behalf Of*Mike *Sent:*Tuesday, July 17, 2018 6:17 PM *To:*app_rpt-users@lists.allstarlink.org *Subject:*[App_rpt-users] *** Reminder***Net Tonight (July 17 2018)
Tonight @ 8:30 edt /00:30utc - connection details www.29999.link <http://www.29999.link/>- please connect 15m early.
ASL Micro/Portable Nodes/Repeaters with WX8L/Sean as our Guest Speaker
*https://wx8l.blogspot.com/2018/06/personal-allstar-pocket-node-based-on.html...
...mike/kb8jnm
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visithttp://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org <mailto:App_rpt-users@lists.allstarlink.org> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visithttp://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-usersand scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
ALSARadio and RPiRadio could be built and added (as a test) SimpleUSB and USBRadio could be built and replace the existing channel drivers. That was going to be my next step. I don't know what the dev team is planning. Steve N4IRS On 7/19/2018 10:22 AM, Mike wrote:
I'm going to be busy for the next week (i think) but could you send me a 'peek' at those raw channel driver files. I just want to see what's going on in a 'study' of it.
But it all sounds good and I think we are missing the ball by not utilizing the gpio.
Perhaps just needs a 'kick-start'
...mike/kb8jnm
On 07/18/2018 11:46 PM, Joe Puma wrote:
these are channel drivers that enable the gpio on the raspberry pi. They need to be complied. I have a complier that will just compile the module. Maybe someone here can provide it to the OP. Would be great if these channel drivers can be included in regular builds of ASL.
https://github.com/N4IRS/ASL_GPIO
Joe kd2nfc.
On Jul 17, 2018, at 11:08 PM, Mike <mm@midnighteng.com <mailto:mm@midnighteng.com>> wrote:
Angelo, welcome aboard !
The answer to your question for the net is...
Outside of buying a pre-altered sound fob,
There appears to be some provision out there or in the making to use GPIO pins on the Pi for PTT and COR for radio/repeater
so I sent this reply to the list in the hopes someone can add something to that or point to some documentation.
...mike/kb8jnm
On 7/17/2018 8:03 PM, Angelo T Sonnesso wrote:
Hay Mike, Thanks for the reminder. I am fairly new to Allstar, and I can use all of the information I can get. 73 N2DYN Angelo *From:*App_rpt-users<app_rpt-users-bounces@lists.allstarlink.org>*On Behalf Of*Mike *Sent:*Tuesday, July 17, 2018 6:17 PM *To:*app_rpt-users@lists.allstarlink.org *Subject:*[App_rpt-users] *** Reminder***Net Tonight (July 17 2018)
Tonight @ 8:30 edt /00:30utc - connection details www.29999.link <http://www.29999.link/>- please connect 15m early.
ASL Micro/Portable Nodes/Repeaters with WX8L/Sean as our Guest Speaker
*https://wx8l.blogspot.com/2018/06/personal-allstar-pocket-node-based-on.html...
...mike/kb8jnm
_______________________________________________
-- Why don't I get email from Doogie telling me I should run a different version of AllStarLink?
Thanks for that info. I guess for me, I'll wait a bit and see what they come up with if it's in active dev. But it's probably time we hit this one. Willing to be beta tester #1 ! ...LOL... Got a few ready to eat ASL Pi's. ...mike/kb8jnm On 07/19/2018 10:56 AM, Steve Zingman wrote:
ALSARadio and RPiRadio could be built and added (as a test) SimpleUSB and USBRadio could be built and replace the existing channel drivers. That was going to be my next step. I don't know what the dev team is planning.
Steve N4IRS
On 7/19/2018 10:22 AM, Mike wrote:
I'm going to be busy for the next week (i think) but could you send me a 'peek' at those raw channel driver files. I just want to see what's going on in a 'study' of it.
But it all sounds good and I think we are missing the ball by not utilizing the gpio.
Perhaps just needs a 'kick-start'
...mike/kb8jnm
On 07/18/2018 11:46 PM, Joe Puma wrote:
these are channel drivers that enable the gpio on the raspberry pi. They need to be complied. I have a complier that will just compile the module. Maybe someone here can provide it to the OP. Would be great if these channel drivers can be included in regular builds of ASL.
https://github.com/N4IRS/ASL_GPIO
Joe kd2nfc.
On Jul 17, 2018, at 11:08 PM, Mike <mm@midnighteng.com <mailto:mm@midnighteng.com>> wrote:
Angelo, welcome aboard !
The answer to your question for the net is...
Outside of buying a pre-altered sound fob,
There appears to be some provision out there or in the making to use GPIO pins on the Pi for PTT and COR for radio/repeater
so I sent this reply to the list in the hopes someone can add something to that or point to some documentation.
...mike/kb8jnm
On 7/17/2018 8:03 PM, Angelo T Sonnesso wrote:
Hay Mike, Thanks for the reminder. I am fairly new to Allstar, and I can use all of the information I can get. 73 N2DYN Angelo *From:*App_rpt-users<app_rpt-users-bounces@lists.allstarlink.org>*On Behalf Of*Mike *Sent:*Tuesday, July 17, 2018 6:17 PM *To:*app_rpt-users@lists.allstarlink.org *Subject:*[App_rpt-users] *** Reminder***Net Tonight (July 17 2018)
Tonight @ 8:30 edt /00:30utc - connection details www.29999.link <http://www.29999.link/>- please connect 15m early.
ASL Micro/Portable Nodes/Repeaters with WX8L/Sean as our Guest Speaker
*https://wx8l.blogspot.com/2018/06/personal-allstar-pocket-node-based-on.html...
...mike/kb8jnm
_______________________________________________
-- Why don't I get email from Doogie telling me I should run a different version of AllStarLink?
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
That is good to hear Steve. Joe Kd2nfc
On Jul 19, 2018, at 10:56 AM, Steve Zingman <szingman@msgstor.com> wrote:
ALSARadio and RPiRadio could be built and added (as a test) SimpleUSB and USBRadio could be built and replace the existing channel drivers. That was going to be my next step. I don't know what the dev team is planning.
Steve N4IRS
On 7/19/2018 10:22 AM, Mike wrote:
I'm going to be busy for the next week (i think) but could you send me a 'peek' at those raw channel driver files. I just want to see what's going on in a 'study' of it.
But it all sounds good and I think we are missing the ball by not utilizing the gpio.
Perhaps just needs a 'kick-start' ...mike/kb8jnm
On 07/18/2018 11:46 PM, Joe Puma wrote:
these are channel drivers that enable the gpio on the raspberry pi. They need to be complied. I have a complier that will just compile the module. Maybe someone here can provide it to the OP. Would be great if these channel drivers can be included in regular builds of ASL.
https://github.com/N4IRS/ASL_GPIO <https://github.com/N4IRS/ASL_GPIO>
Joe kd2nfc.
On Jul 17, 2018, at 11:08 PM, Mike <mm@midnighteng.com <mailto:mm@midnighteng.com>> wrote:
Angelo, welcome aboard ! The answer to your question for the net is...
Outside of buying a pre-altered sound fob,
There appears to be some provision out there or in the making to use GPIO pins on the Pi for PTT and COR for radio/repeater
so I sent this reply to the list in the hopes someone can add something to that or point to some documentation.
...mike/kb8jnm
On 7/17/2018 8:03 PM, Angelo T Sonnesso wrote:
Hay Mike, Thanks for the reminder. I am fairly new to Allstar, and I can use all of the information I can get.
73 N2DYN Angelo
From: App_rpt-users <app_rpt-users-bounces@lists.allstarlink.org> <mailto:app_rpt-users-bounces@lists.allstarlink.org> On Behalf Of Mike Sent: Tuesday, July 17, 2018 6:17 PM To: app_rpt-users@lists.allstarlink.org <mailto:app_rpt-users@lists.allstarlink.org> Subject: [App_rpt-users] *** Reminder***Net Tonight (July 17 2018)
Tonight @ 8:30 edt /00:30utc - connection details www.29999.link <http://www.29999.link/> - please connect 15m early.
ASL Micro/Portable Nodes/Repeaters with WX8L/Sean as our Guest Speaker
https://wx8l.blogspot.com/2018/06/personal-allstar-pocket-node-based-on.html <https://wx8l.blogspot.com/2018/06/personal-allstar-pocket-node-based-on.html>
...mike/kb8jnm
_______________________________________________
-- Why don't I get email from Doogie telling me I should run a different version of AllStarLink?
App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Just to be clear, ALL the channel drivers in my repo need testing. None of them should be considered ready to run. Steve On 7/19/2018 12:36 PM, Joe KD2NFC wrote:
That is good to hear Steve.
Joe Kd2nfc
On Jul 19, 2018, at 10:56 AM, Steve Zingman <szingman@msgstor.com <mailto:szingman@msgstor.com>> wrote:
ALSARadio and RPiRadio could be built and added (as a test) SimpleUSB and USBRadio could be built and replace the existing channel drivers. That was going to be my next step. I don't know what the dev team is planning.
Steve N4IRS
On 7/19/2018 10:22 AM, Mike wrote:
I'm going to be busy for the next week (i think) but could you send me a 'peek' at those raw channel driver files. I just want to see what's going on in a 'study' of it.
But it all sounds good and I think we are missing the ball by not utilizing the gpio.
Perhaps just needs a 'kick-start'
...mike/kb8jnm
On 07/18/2018 11:46 PM, Joe Puma wrote:
these are channel drivers that enable the gpio on the raspberry pi. They need to be complied. I have a complier that will just compile the module. Maybe someone here can provide it to the OP. Would be great if these channel drivers can be included in regular builds of ASL.
https://github.com/N4IRS/ASL_GPIO
Joe kd2nfc.
On Jul 17, 2018, at 11:08 PM, Mike <mm@midnighteng.com <mailto:mm@midnighteng.com>> wrote:
Angelo, welcome aboard !
The answer to your question for the net is...
Outside of buying a pre-altered sound fob,
There appears to be some provision out there or in the making to use GPIO pins on the Pi for PTT and COR for radio/repeater
so I sent this reply to the list in the hopes someone can add something to that or point to some documentation.
...mike/kb8jnm
On 7/17/2018 8:03 PM, Angelo T Sonnesso wrote:
Hay Mike, Thanks for the reminder. I am fairly new to Allstar, and I can use all of the information I can get. 73 N2DYN Angelo *From:*App_rpt-users<app_rpt-users-bounces@lists.allstarlink.org>*On Behalf Of*Mike *Sent:*Tuesday, July 17, 2018 6:17 PM *To:*app_rpt-users@lists.allstarlink.org *Subject:*[App_rpt-users] *** Reminder***Net Tonight (July 17 2018)
Tonight @ 8:30 edt /00:30utc - connection details www.29999.link <http://www.29999.link/>- please connect 15m early.
ASL Micro/Portable Nodes/Repeaters with WX8L/Sean as our Guest Speaker
*https://wx8l.blogspot.com/2018/06/personal-allstar-pocket-node-based-on.html...
...mike/kb8jnm
_______________________________________________
-- Why don't I get email from Doogie telling me I should run a different version of AllStarLink? _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org <mailto:App_rpt-users@lists.allstarlink.org> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Ok Copy, so far with testing the ALSARadio it seems to work for me. There may have been an issue with identifying DTMF but I was doing something really experimental with a RTL-SDR and rtf_fm. I was planning on trying SimpleUSB and USBradio channel drivers with a USB fob and RPI gpio because I have a system thats setup like that already that I use for Packet Data and other digital modes. Joe Kd2nfc
On Jul 19, 2018, at 12:37 PM, Steve Zingman <szingman@msgstor.com> wrote:
Just to be clear, ALL the channel drivers in my repo need testing. None of them should be considered ready to run.
Steve
On 7/19/2018 12:36 PM, Joe KD2NFC wrote:
That is good to hear Steve.
Joe Kd2nfc
On Jul 19, 2018, at 10:56 AM, Steve Zingman <szingman@msgstor.com <mailto:szingman@msgstor.com>> wrote:
ALSARadio and RPiRadio could be built and added (as a test) SimpleUSB and USBRadio could be built and replace the existing channel drivers. That was going to be my next step. I don't know what the dev team is planning.
Steve N4IRS
On 7/19/2018 10:22 AM, Mike wrote:
I'm going to be busy for the next week (i think) but could you send me a 'peek' at those raw channel driver files. I just want to see what's going on in a 'study' of it.
But it all sounds good and I think we are missing the ball by not utilizing the gpio.
Perhaps just needs a 'kick-start' ...mike/kb8jnm
On 07/18/2018 11:46 PM, Joe Puma wrote:
these are channel drivers that enable the gpio on the raspberry pi. They need to be complied. I have a complier that will just compile the module. Maybe someone here can provide it to the OP. Would be great if these channel drivers can be included in regular builds of ASL.
https://github.com/N4IRS/ASL_GPIO <https://github.com/N4IRS/ASL_GPIO>
Joe kd2nfc.
On Jul 17, 2018, at 11:08 PM, Mike <mm@midnighteng.com <mailto:mm@midnighteng.com>> wrote:
Angelo, welcome aboard ! The answer to your question for the net is...
Outside of buying a pre-altered sound fob,
There appears to be some provision out there or in the making to use GPIO pins on the Pi for PTT and COR for radio/repeater
so I sent this reply to the list in the hopes someone can add something to that or point to some documentation.
...mike/kb8jnm
On 7/17/2018 8:03 PM, Angelo T Sonnesso wrote: > Hay Mike, > Thanks for the reminder. > I am fairly new to Allstar, and I can use all of the information I can get. > > > 73 N2DYN Angelo > > From: App_rpt-users <app_rpt-users-bounces@lists.allstarlink.org> <mailto:app_rpt-users-bounces@lists.allstarlink.org> On Behalf Of Mike > Sent: Tuesday, July 17, 2018 6:17 PM > To: app_rpt-users@lists.allstarlink.org <mailto:app_rpt-users@lists.allstarlink.org> > Subject: [App_rpt-users] *** Reminder***Net Tonight (July 17 2018) > > Tonight @ 8:30 edt /00:30utc - connection details www.29999.link <http://www.29999.link/> - please connect 15m early. > > ASL Micro/Portable Nodes/Repeaters with WX8L/Sean as our Guest Speaker > > https://wx8l.blogspot.com/2018/06/personal-allstar-pocket-node-based-on.html <https://wx8l.blogspot.com/2018/06/personal-allstar-pocket-node-based-on.html> > > > ...mike/kb8jnm > > > > _______________________________________________ > -- Why don't I get email from Doogie telling me I should run a different version of AllStarLink?
App_rpt-users mailing list App_rpt-users@lists.allstarlink.org <mailto:App_rpt-users@lists.allstarlink.org> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users <http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users>
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users <http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org <mailto:App_rpt-users@lists.allstarlink.org> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users <http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users>
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users <http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
That's kinda where I want to head to... SimpleUSB and gpio Would make it work similar to my radio nodes using the parallel port. Suppose to rain again this weekend.. perhaps I'll dable onward.... ...mike/kb8jnm On 07/19/2018 01:27 PM, Joe KD2NFC wrote:
Ok Copy, so far with testing the ALSARadio it seems to work for me. There may have been an issue with identifying DTMF but I was doing something really experimental with a RTL-SDR and rtf_fm.
I was planning on trying SimpleUSB and USBradio channel drivers with a USB fob and RPI gpio because I have a system thats setup like that already that I use for Packet Data and other digital modes.
Joe Kd2nfc
On Jul 19, 2018, at 12:37 PM, Steve Zingman <szingman@msgstor.com <mailto:szingman@msgstor.com>> wrote:
Just to be clear, ALL the channel drivers in my repo need testing. None of them should be considered ready to run.
Steve
On 7/19/2018 12:36 PM, Joe KD2NFC wrote:
That is good to hear Steve.
Joe Kd2nfc
On Jul 19, 2018, at 10:56 AM, Steve Zingman <szingman@msgstor.com <mailto:szingman@msgstor.com>> wrote:
ALSARadio and RPiRadio could be built and added (as a test) SimpleUSB and USBRadio could be built and replace the existing channel drivers. That was going to be my next step. I don't know what the dev team is planning.
Steve N4IRS
On 7/19/2018 10:22 AM, Mike wrote:
I'm going to be busy for the next week (i think) but could you send me a 'peek' at those raw channel driver files. I just want to see what's going on in a 'study' of it.
But it all sounds good and I think we are missing the ball by not utilizing the gpio.
Perhaps just needs a 'kick-start'
...mike/kb8jnm
On 07/18/2018 11:46 PM, Joe Puma wrote:
these are channel drivers that enable the gpio on the raspberry pi. They need to be complied. I have a complier that will just compile the module. Maybe someone here can provide it to the OP. Would be great if these channel drivers can be included in regular builds of ASL.
https://github.com/N4IRS/ASL_GPIO
Joe kd2nfc.
> On Jul 17, 2018, at 11:08 PM, Mike <mm@midnighteng.com > <mailto:mm@midnighteng.com>> wrote: > > Angelo, welcome aboard ! > > The answer to your question for the net is... > > Outside of buying a pre-altered sound fob, > > There appears to be some provision out there or in the making to > use GPIO pins on the Pi for PTT and COR for radio/repeater > > so I sent this reply to the list in the hopes someone can add > something to that or point to some documentation. > > ...mike/kb8jnm > > > > On 7/17/2018 8:03 PM, Angelo T Sonnesso wrote: >> Hay Mike, >> Thanks for the reminder. >> I am fairly new to Allstar, and I can use all of the >> information I can get. >> 73 N2DYN Angelo >> *From:*App_rpt-users<app_rpt-users-bounces@lists.allstarlink.org>*On >> Behalf Of*Mike >> *Sent:*Tuesday, July 17, 2018 6:17 PM >> *To:*app_rpt-users@lists.allstarlink.org >> *Subject:*[App_rpt-users] *** Reminder***Net Tonight (July 17 2018) >> >> Tonight @ 8:30 edt /00:30utc - connection details >> www.29999.link <http://www.29999.link/>- please connect 15m early. >> >> ASL Micro/Portable Nodes/Repeaters with WX8L/Sean as our Guest >> Speaker >> >> *https://wx8l.blogspot.com/2018/06/personal-allstar-pocket-node-based-on.html... >> >> ...mike/kb8jnm >> >> >> >> _______________________________________________ >>
-- Why don't I get email from Doogie telling me I should run a different version of AllStarLink? _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org <mailto:App_rpt-users@lists.allstarlink.org> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visithttp://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org <mailto:App_rpt-users@lists.allstarlink.org> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Joe, You must be on the right track, if Doogie is spewing FUD. Keep us informed. On 7/19/2018 1:27 PM, Joe KD2NFC wrote:
Ok Copy, so far with testing the ALSARadio it seems to work for me. There may have been an issue with identifying DTMF but I was doing something really experimental with a RTL-SDR and rtf_fm.
I was planning on trying SimpleUSB and USBradio channel drivers with a USB fob and RPI gpio because I have a system thats setup like that already that I use for Packet Data and other digital modes.
Joe Kd2nfc
-- Why don't I get email from Doogie telling me I should run a different version of AllStarLink?
I don’t get what all the resistance is when discussing it on his group. its not a fantasy, or a fallacy, there is nothing wrong with using the gpio of the raspberry pi and its quite easy to implement, you don’t even have to solder the cmxxx chip. as a matter of fact, on other computer/radio projects its your only option like with SVXLink. Its a popular topic and being asked about because people have a need, why shun it as a useful function. I respect everyone but I read some statements that were a little off key in the spirit of being a ham radio enthusiast. It almost felt like I was in the support group of a commercial software product and was asking a question that violated a SLA, lmao. You did good Steve by at least starting its development on the channel drivers, when I found them I assumed they were in dev but workable, they did work. With the Baofeng 888 combination the audio opamp takes 3V to power, as far as voltage its perfect for RPi COR and if not, we are skilled enough to figure out a circuit for another radio; use a transistor to switch ground. You also need to include parts doing a RPi>CMXXX>BAOFENG888 setup too. I don’t have a problem with the USB FOB, I have one, did the mod and built it into my custom node. I would of wired it to the RPi which was two inches away with ease if there were official channel drivers that support it from either distro. The worry about any RF on the RPi is silly too, all the electronics are susceptible to RF, the naked Cmxxx chip and any USB audio already has an issue with the RF from the nearby radio. thats enough of a challenge for some. So why even care about the RPi GPIO? at some point in the future you might not even need a radio to integrate with the RPi, imagine that. The Pi can already transmit with a GPIO pin. You can modulate with enough power to use around the house, look at https://github.com/F5OEO/rpitx <https://github.com/F5OEO/rpitx> …and it won’t be long before a RPi adds audio in to the hardware and even if they never do there are other micro computers that do. I though us hams are suppose to think outside the box. Joe kd2nfc
On Jul 20, 2018, at 1:05 PM, Steve Zingman <szingman@msgstor.com> wrote:
Joe, You must be on the right track, if Doogie is spewing FUD. Keep us informed.
On 7/19/2018 1:27 PM, Joe KD2NFC wrote:
Ok Copy, so far with testing the ALSARadio it seems to work for me. There may have been an issue with identifying DTMF but I was doing something really experimental with a RTL-SDR and rtf_fm.
I was planning on trying SimpleUSB and USBradio channel drivers with a USB fob and RPI gpio because I have a system thats setup like that already that I use for Packet Data and other digital modes.
Joe Kd2nfc
-- Why don't I get email from Doogie telling me I should run a different version of AllStarLink?
App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
participants (5)
-
Angelo T Sonnesso -
Joe KD2NFC -
Joe Puma
-
Mike -
Steve Zingman