Which channel driver are you using? Anything in the log? 73, Steve N4IRS On 12/26/2017 11:30 AM, Keith Dobbins wrote:
I had my node working under ACID till a hard drive decided to crash on me. I did the re-install with the 32 bit DIAL install. Everything about the node appears to function properly but from asterisk to my URI I get ZERO audio in or out. It's the only audio adapter, and the URIDIAG with the loopback plug tests fine. It will activate the TX and I get the blinking green led but no audio in or out. Is there somewhere I can look to troubleshoot this issue? The motherboard is an older atom 330 board. Should I fall back to the older ACID install for this node which had worked.
Thanks for any guidance that you can provide. Keith Dobbins N8KLD
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.